Temperature Adjustment | Kenmore 2305761A manual

Digital Controls

For your convenience, your controls are preset at the factory. When installing your refrigerator, make sure that the controls are still preset to the mid-settings as shown. The digital control panel is located at the top of the refrigerator compartment and enables you to view the temperature control set points.

NOTE: The factory recommended set points are 0°F (-18°C) for the freezer and 37°F (3°C) for the refrigerator.

To turn refrigerator on and view set points:

•Press and hold ON/OFF for 2 seconds.

C0LD

FREEZER

REFRIGERATOR

C0LD

COLDER

To view the Celsius temperatures:

•Press the °C SELECT touch pad. The indicator will light up.

NOTE: If the freezer temperature is below zero, the indicator light next to the freezer display will light up.

Adjusting Digital Controls

To adjust set point temperatures:

•Press the refrigerator or freezer up or down arrow until the desired temperature is reached.

REFRIGERATOR COLD

COLDER

NOTE: Wait at least 24 hours between adjustments and then recheck the temperatures before other adjustments are made.

The set point range for the freezer is -5°F to 5°F (-21 °C to -15°C) and 33°F to 41 °F (1°C to 5°C) for the refrigerator.

CONDITION/REASON:		TEMPERATURE
		ADJUSTMENT:
REFRIGERATOR	too cold	REFRIGERATOR
- Not set correctly	for your	Control 1o higher
conditions
REFRIGERATOR	too warm	REFRIGERATOR
- High use or room very warm		Control 1o lower
FREEZER too cold		FREEZER Control	1°
- Not set correctly	for your	higher
conditions
FREEZER too warm/too little ice		FREEZER Control	1o
- High use or heavy ice use		lower

Additional Digital Control Panel Features

Additional features are located on the control panel at the top of the refrigerator compartment.

GrocerySavor TM

The GrocerySavor TM feature assists with periods of high refrigerator use, full grocery loads, or temporarily warm room temperatures.

•Press GrocerySavor TM to set the temperatures to

-10°F (-23°C) for the freezer and 34°F (1°C) for the refrigerator. The GrocerySavor TM indicator light will remain on for 24 hours unless manually turned off.

NOTE: The temperature display will not change. After

24 hours, the refrigerator and freezer compartments return to the previous temperature set points.

Accelerated Ice Production

This feature assists with temporary periods of heavy ice use by increasing ice production over a 24-hour period.

•Press the accelerated ice production touch pad to set the freezer temperature to -10°F (-23°C). The accelerated ice setting will remain on for 24 hours unless manually turned off. The display will continue to display your normal temperature set point.

NOTES:

•The temperature display will not change. After 24 hours, the freezer temperature returns to the previous temperature set point.

If increased ice production is desired at all times, set the Freezer control to a colder number. Setting the freezer to a

colder temperature may make some foods, such as ice cream, harder.

Cut Hazard

Use a sturdy glass when dispensing ice or water.

Failure to do so can result in cuts.

Your electronic dispenser offers several options: the ability to select crushed or cubed ice, a special light that turns on when you use the dispenser and can be set to Auto mode, and a lock option to avoid unintentional dispensing.