Nilfisk-Advance America SR 1700D 2W D Safety Systems, Main Technical Data, Stability

Page 45

USER MANUAL

Stability

Machine stability depends on the conditions in which it is used.

If the machine is used within the conditions of use specified in the manual, it is stable.

To this end, the following tests were carried out under the same conditions on a prototype identical to the series model and no stability problems arose. The conditions were:

Flat ground with good surface conditions:

Transfer maximum speed: 14 km/h

Working speed: from 1 to 8 km/h

Bending radius (maximum speed of 14 km/h): 3 m

Bending radius (speed of 5 km/h): 0 m.

On sloping ground with good surface conditions and maximum longitudinal slope of 20%:

Bending radius (maximum speed of 5 km/h): 3 m

Bending radius (speed of 1 km/h): 0 m. Maximum crossfall while in transfer: 15%. Maximum crossfall, at 5 km/h: 20%.

The tests were carried out with lowered and empty hopper. For different conditions of use, the machine operator should be able to assess the limits of the machine,

and should, in any case, follow the indications laid down in the manual.

Information on brooms

Side brooms (2, Fig. E)

Polypropylene side broom

Polypropylene and steel side broom

Steel side broom

Nylon side broom

Main brooms (13, Fig. E)

Natural fibre and polypropylene main broom

Polypropylene main broom

Polypropylene and steel main broom

Nylon main broom

Brooms with a moplen shaft or with different bristles can be supplied on request.

SAFETY SYSTEMS

The machine is provided with:

An operator's seat sensor that stops the machine as soon as the operator leaves the seat;

A safety lever on the joystick to avoid accidental wrong operation.

MAIN TECHNICAL DATA

General data

Values

Sweeping system

Mechanical suction

 

 

Loading system

Front

Sweeping range with one side broom

1,300 mm

 

 

Sweeping range with two side brooms

1,700 mm

Collection width

1,000 mm

 

 

Standard hour working capability

21,000 m2/h

Main broom length

994 mm

 

 

Main broom diameter

380 mm

Engine

Lombardini LDW1003

 

 

Broom motor

Hydraulic

Drive motor

Hydraulic

 

 

Suction motor

Electric 12 V

Drive type

Hydrostatic

 

 

Gradeability

20%

Maximum drive speed

15 Km/h

 

 

Dust filters

Polyester multi-pocket

Filtering surface

8.5 m²

 

 

Hopper

Front

Capacity

360 litres

 

 

Dumping type

Multilevel

Dumping height

1,510 mm

 

 

Lifting type

Hydraulic

 

 

Overall dimensions

Values

Length

2,500 mm

 

 

Width

1,350 mm

Height

1,570 mm

 

 

Weight in running conditions

1,280 Kg

 

 

Diesel engine

Values

Make

Lombardini

 

 

Type

LDW1003

Cylinders

3

 

 

Displacement

1,028 cm³

Bore

75 mm

 

 

Stroke

77.6 mm

Compression ratio

22.8 : 1

 

 

Maximum speed

3,600 rpm

Maximum speed (in running condition)

2,450 rpm

 

 

Maximum power

15 kW

Battery

12 V 80 Ah

 

 

33014815(1)2005-07 A

7

Image 45
Contents 3301481512005-07 a Manufacturer Nilfisk-Advance Spa Sweeper3301481512005-07 a Allgemeine Anweisungen BetriebsanleitungAllgemeine Anweisungen EinleitungVorbedingung MaschinenidentifizierungTerminologien UND Ihre Bedeutung Verantwortlichkeit DES BedienersSicherheitsvorschriften Warnzeichen TRANSPORT, VERLAGERUNG, InstallationAblanden UND Verlagern Siehe Abb. CTechnische Eigenschaften Maschinenbeschreibung Technische Daten SicherheitssystemeStabilität Informationen zu den BürstenUmgebungswerte AnwendungGeräuschpegel Steuerungen UND InstrumenteGebrauch DER Maschine GebrauchsanweisungenMaschinenabstellen Störungen UND Abhilfen Störungen UND AbhilfenBetriebsanleitung Wartungstabelle Reinigung Reinigung UND WartungPlanmässige Wartung Allgemeine Reinigung der MaschinePlanmässige Prüfungen Ausserordentliche Wartung ABBAU, Entsorgung AbbauEntsorgung Schutzplatine PläneSchaltplan RelaisplatineSiehe Abb. AI HydraulikplanManuel Dutilisation Avertissements Generaux IntroductionPrecautions Pour LA Securite DES Operateurs Terminologie ET SignificationResponsabilite DE Loperateur Signaux Dattention TRANSPORT, MANUTENTION, InstallationDechargement ET Manutention Voir Fig. CEmballages Caracteristiques TechniquesControles Generaux Utilisation PrevueDescription DE LA Machine Donnees Techniques Principales Systemes DE SecuriteStabilité Informations sur les brossesUtilisation Commandes ET InstrumentsValeurs Environnementales Niveau DE BruitUtilisation DE LA Machine Instructions Pour LutilisationArret DE LA Machine Problemes ET Remedes Problemes ET RemedesLa brosse centrale ne descend / monte pas Tableau Dentretien Nettoyage Nettoyage ET EntretienEntretien Periodique Nettoyage général de la machineControles Periodiques Entretien Extraordinaire DEMANTELEMENT, Ecoulement DemantelementEcoulement Schema Electrique SchemasCarte Fusibles Carte RelaisVoir Fig. Al Schema HydrauliqueIntroduction Foreword General WarningsMachine Identification Purpose Safe-KeepingDefinitions Operators Safety PrecautionsOperators Responsibility Exposed personTRANSPORTATION, HANDLING, Installation Discharge and HandlingSee Fig. C Packing Technical DataGeneral Checks USEMachine Description Main Technical Data Safety SystemsStability Information on broomsEnvironmental Conditions USENoise Level Controls and InstrumentsMachine USE Instructions for USEMachine Stop Problems and Remedies Problems and Remedies3301481512005-07 a Maintenance Table Cleaning Cleaning and MaintenancePeriodical Maintenance Machine general cleaningPeriodical Checks Extraordinary Maintenance DISMANTLING, Disposal DismantlingDisposal Wiring Diagram DiagramsFuse Board Relay BoardSee Fig. AI Hydraulic DiagramAlgemene Waarschuwingen GebruikershandleidingAlgemene Waarschuwingen InleidingVoorwoord Identificatie VAN DE MachineVerantwoordelijkheid VAN DE Bediener DefinitiesVeiligheidsmaatregelen Voor DE Bediener GevarenzonesWaarschuwingstekens VERVOER, HANTERING, InstallatieLossen EN Bediening Zie Afb. CTechnische Gegevens Beschrijving VAN DE Machine Belangrijkste Technische Gegevens VeiligheidssystemenStabiliteit Informatie over borstelsMilieu GebruikGeluidsniveau Bedieningen EN InstrumentenGebruik VAN DE Machine GebruiksinstructiesMachinestop Problemen EN Oplossingen Problemen EN OplossingenGebruikershandleiding Onderhoudstabel Reiniging Reiniging EN OnderhoudPeriodiek Onderhoud Algemene reiniging van de machinePeriodieke Controles Buitengewoon Onderhoud DEMONTEREN, Afdanken DemonterenAfdanken Bedradingsschema SCHEMA’SZekeringenbord RelaisbordZie Afb. AI Schema Hydraulica3301481512005-07 a 3301481512005-07 a 3301481512005-07 a 3301481512005-07 a 3301481512005-07 a 3301481512005-07 a 3301481512005-07 a Page 3301481512005-07 a 3301481512005-07 a

SR 1700D 2W D specifications

The Nilfisk-Advance America SR 1700D 2W D is a robust and efficient ride-on scrubber designed for commercial and industrial cleaning applications. This machine stands out for its versatility and effectiveness, addressing the cleaning needs of a wide range of environments, including warehouses, manufacturing facilities, and retail spaces.

One of the main features of the SR 1700D is its dual brush system, which provides excellent cleaning performance on various floor surfaces. With a cleaning width of up to 34 inches, it can cover large areas quickly, reducing the time spent on cleaning tasks. The machine is equipped with two cylindrical brushes that rotate at high speeds, effectively removing dirt and debris while ensuring that surfaces are thoroughly scrubbed.

The SR 1700D is designed with user comfort and ease of operation in mind. Its intuitive controls allow operators to easily adjust settings such as brush pressure and water flow, minimizing the learning curve for new users. The spacious operator compartment ensures comfort during prolonged use, allowing staff to clean effectively without fatigue.

Technology plays a crucial role in the SR 1700D's design. Its eco-friendly cleaning solution management system allows users to optimize water and detergent usage, reducing environmental impact and operating costs. The machine also features a high-capacity recovery tank, which enables extended cleaning sessions without the need for frequent emptying.

Durability is another key characteristic of the SR 1700D. Constructed with high-quality materials, it is built to withstand the rigors of daily use in demanding environments. The machine's design incorporates protective features, such as impact-resistant bumpers, ensuring longevity and reducing maintenance needs.

In terms of mobility, the SR 1700D is equipped with robust wheels and a tight turning radius, allowing it to navigate through tight spaces and around obstacles with ease. This makes it an ideal choice for facilities with complex layouts.

Overall, the Nilfisk-Advance America SR 1700D 2W D is a powerful and efficient solution for commercial cleaning needs. Its combination of performance, user-friendly features, and advanced technology makes it a valuable asset for any organization looking to maintain cleanliness and hygiene in their facilities.