Extraordinary Maintenance

USER MANUAL

WARNING!

Any maintenance operation should be carried out with the machine off.

Wait for all the parts to stop and cool down.

For the engine maintenance, please follow the instructions provided in the Use and Maintenance Manual concerning the engine installed on the sweeper. This manual comes in a special case.

Side seal replacement

–Remove the mounting screws (1, Fig. U) and the seal holders (2).

–Fit the new seal with the seal holders, so that the seal slightly touches the ground.

–Tighten the mounting screws.

Main broom replacement

–Remove the right side lid.

–Remove the mounting screws and the seal holders.

–Move the seal sideways.

–Remove the split pin (1, Fig. V).

–Remove the support (2, Fig. V).

–Remove the broom (3, Fig. V).

–Install the new broom (3, Fig. V).

–Install the support (2, Fig. V).

–Reinstall the split pin (1, Fig. V).

–Reinstall the seal.

–Close the lid.

Main broom (print on ground) adjustment

If the main broom is left rotating for a few minutes when the machine is stationary, the print left on the ground is useful to adjust the broom itself.

–If the print size is less then 40 mm or more than 100 mm, adjust the spring pressure with the mounting nut (1, Fig. W).

Side broom replacement

–Unscrew the mounting screw (1, Fig. X).

–Remove the broom.

–Unscrew the support mounting screws.

–Replace the broom and reinstall the mounting screws.

–Secure the broom to the motor.

Side broom adjustment

–Adjust the broom pressure with the setscrew (1, Fig. Y).

Rear seal replacement

–The seal should touch the ground lightly and evenly.

–To replace the seal, remove the mounting nuts (1, Fig. Z).

–Remove the seal holders.

–Replace the seal and reinstall.

Closed pocket filter replacement

–Remove the hood.

–Unscrew the cover (1, Fig. AA) screws and remove the cover.

–Remove the mounting bars by unscrewing the screws (1, Fig. AB).

–Remove the filter (1, Fig. AC).

–Disconnect the filter shaker cable (1, Fig. AD).

–Replace the filter (1, Fig. AC).

–Reconnect the filter shaker.

–Reinstall the filter (1, Fig. AC) in the hopper.

–Reinstall the mounting bars.

–Tighten the mounting screws (1, Fig. AB).

–Reinstall the cover.

–When installing the filter, make sure that the cover gasket is air-tight and that the filter is positioned correctly.

Machine releasing

To tow the machine, release the hydrostatic transmission by turning the screw (1, Fig. AE) counterclockwise.

33014815(1)2005-07 A

SR 1700D 2W D specifications

The Nilfisk-Advance America SR 1700D 2W D is a robust and efficient ride-on scrubber designed for commercial and industrial cleaning applications. This machine stands out for its versatility and effectiveness, addressing the cleaning needs of a wide range of environments, including warehouses, manufacturing facilities, and retail spaces.

One of the main features of the SR 1700D is its dual brush system, which provides excellent cleaning performance on various floor surfaces. With a cleaning width of up to 34 inches, it can cover large areas quickly, reducing the time spent on cleaning tasks. The machine is equipped with two cylindrical brushes that rotate at high speeds, effectively removing dirt and debris while ensuring that surfaces are thoroughly scrubbed.

The SR 1700D is designed with user comfort and ease of operation in mind. Its intuitive controls allow operators to easily adjust settings such as brush pressure and water flow, minimizing the learning curve for new users. The spacious operator compartment ensures comfort during prolonged use, allowing staff to clean effectively without fatigue.

Technology plays a crucial role in the SR 1700D's design. Its eco-friendly cleaning solution management system allows users to optimize water and detergent usage, reducing environmental impact and operating costs. The machine also features a high-capacity recovery tank, which enables extended cleaning sessions without the need for frequent emptying.

Durability is another key characteristic of the SR 1700D. Constructed with high-quality materials, it is built to withstand the rigors of daily use in demanding environments. The machine's design incorporates protective features, such as impact-resistant bumpers, ensuring longevity and reducing maintenance needs.

In terms of mobility, the SR 1700D is equipped with robust wheels and a tight turning radius, allowing it to navigate through tight spaces and around obstacles with ease. This makes it an ideal choice for facilities with complex layouts.

Overall, the Nilfisk-Advance America SR 1700D 2W D is a powerful and efficient solution for commercial cleaning needs. Its combination of performance, user-friendly features, and advanced technology makes it a valuable asset for any organization looking to maintain cleanliness and hygiene in their facilities.