Nilfisk-Advance America SR 1700D 2W D Use, Environmental Conditions, Noise Level

Page 46

USER MANUAL

ENVIRONMENTAL CONDITIONS

Working

The machine should only be used in a suitable environment. The work environment should be well-lit, should present no danger of explosions and should be protected from bad weather conditions.

The machine functions correctly within the following environmental conditions:

Temperature: +10°C ÷ +40°C.

Humidity: 30% ÷ 95% non-condensed.

Storage

When not in use, the machine should be stored indoor and protected from bad weather conditions.

Temperature: +1°C ÷ +50°C.

Humidity: maximum 95% non-condensed.

NOISE LEVEL

Measurements were taken in the workplace and around the machine at a distance of 1 m and at a height of 1.6 m from the floor level under working conditions.

If the machine is used according to the instructions, the vibrations do not cause dangerous situations.

The machine vibration level is below 2.5 m/s².

USE

WARNING!

The machine should be used ONLY by qualified personnel who know all the machine controls.

NOTE

Before starting the machine, check the seat sensor operation: without the operator, the engine should immediately stop.

CONTROLS AND INSTRUMENTS

Without headlights (See Fig. H)

1.Joystick

2.Hopper overheating buzzer (optional)

3.Fuse board

4.Accelerator lever

5.Parking brake lever

6.Ignition switch

7.Warning light instrument panel

8.Drive pedal

9.Suction fan switch

10.Horn switch

11.Brake pedal

12.Water pump switch (optional)

With headlights (See Fig. I)

1.Joystick

2.Hopper overheating buzzer (optional)

3.Fuse board

4.Accelerator lever

5.Parking brake lever

6.Ignition switch

7.Warning light instrument panel

8.Drive pedal

9.Suction fan switch

10.Warning switch

11.Brake pedal

12.Combination switch

13.Water pump switch (optional)

8

33014815(1)2005-07 A

Page 45 Page 47
Image 46
Page 45 Page 47
Contents Sweeper 3301481512005-07 a Manufacturer Nilfisk-Advance Spa3301481512005-07 a Betriebsanleitung Allgemeine AnweisungenVorbedingung EinleitungAllgemeine Anweisungen MaschinenidentifizierungVerantwortlichkeit DES Bedieners Terminologien UND Ihre BedeutungSicherheitsvorschriften Ablanden UND Verlagern TRANSPORT, VERLAGERUNG, InstallationWarnzeichen Siehe Abb. CTechnische Eigenschaften Maschinenbeschreibung Stabilität SicherheitssystemeTechnische Daten Informationen zu den BürstenGeräuschpegel AnwendungUmgebungswerte Steuerungen UND InstrumenteGebrauchsanweisungen Gebrauch DER MaschineMaschinenabstellen Störungen UND Abhilfen Störungen UND AbhilfenBetriebsanleitung Planmässige Wartung Reinigung UND WartungWartungstabelle Reinigung Allgemeine Reinigung der MaschinePlanmässige Prüfungen Ausserordentliche Wartung Abbau ABBAU, EntsorgungEntsorgung Schaltplan PläneSchutzplatine RelaisplatineHydraulikplan Siehe Abb. AIManuel Dutilisation Introduction Avertissements GenerauxTerminologie ET Signification Precautions Pour LA Securite DES OperateursResponsabilite DE Loperateur Dechargement ET Manutention TRANSPORT, MANUTENTION, InstallationSignaux Dattention Voir Fig. CControles Generaux Caracteristiques TechniquesEmballages Utilisation PrevueDescription DE LA Machine Stabilité Systemes DE SecuriteDonnees Techniques Principales Informations sur les brossesValeurs Environnementales Commandes ET InstrumentsUtilisation Niveau DE BruitInstructions Pour Lutilisation Utilisation DE LA MachineArret DE LA Machine Problemes ET Remedes Problemes ET RemedesLa brosse centrale ne descend / monte pas Entretien Periodique Nettoyage ET EntretienTableau Dentretien Nettoyage Nettoyage général de la machineControles Periodiques Entretien Extraordinaire Demantelement DEMANTELEMENT, EcoulementEcoulement Carte Fusibles SchemasSchema Electrique Carte RelaisSchema Hydraulique Voir Fig. AlIntroduction Machine Identification General WarningsForeword Purpose Safe-KeepingOperators Responsibility Operators Safety PrecautionsDefinitions Exposed personDischarge and Handling TRANSPORTATION, HANDLING, InstallationSee Fig. C General Checks Technical DataPacking USEMachine Description Stability Safety SystemsMain Technical Data Information on broomsNoise Level USEEnvironmental Conditions Controls and InstrumentsInstructions for USE Machine USEMachine Stop Problems and Remedies Problems and Remedies3301481512005-07 a Periodical Maintenance Cleaning and MaintenanceMaintenance Table Cleaning Machine general cleaningPeriodical Checks Extraordinary Maintenance Dismantling DISMANTLING, DisposalDisposal Fuse Board DiagramsWiring Diagram Relay BoardHydraulic Diagram See Fig. AIGebruikershandleiding Algemene WaarschuwingenVoorwoord InleidingAlgemene Waarschuwingen Identificatie VAN DE MachineVeiligheidsmaatregelen Voor DE Bediener DefinitiesVerantwoordelijkheid VAN DE Bediener GevarenzonesLossen EN Bediening VERVOER, HANTERING, InstallatieWaarschuwingstekens Zie Afb. CTechnische Gegevens Beschrijving VAN DE Machine Stabiliteit VeiligheidssystemenBelangrijkste Technische Gegevens Informatie over borstelsGeluidsniveau GebruikMilieu Bedieningen EN InstrumentenGebruiksinstructies Gebruik VAN DE MachineMachinestop Problemen EN Oplossingen Problemen EN OplossingenGebruikershandleiding Periodiek Onderhoud Reiniging EN OnderhoudOnderhoudstabel Reiniging Algemene reiniging van de machinePeriodieke Controles Buitengewoon Onderhoud Demonteren DEMONTEREN, AfdankenAfdanken Zekeringenbord SCHEMA’SBedradingsschema RelaisbordSchema Hydraulica Zie Afb. AI3301481512005-07 a 3301481512005-07 a 3301481512005-07 a 3301481512005-07 a 3301481512005-07 a 3301481512005-07 a 3301481512005-07 a Page 3301481512005-07 a 3301481512005-07 a

SR 1700D 2W D specifications

The Nilfisk-Advance America SR 1700D 2W D is a robust and efficient ride-on scrubber designed for commercial and industrial cleaning applications. This machine stands out for its versatility and effectiveness, addressing the cleaning needs of a wide range of environments, including warehouses, manufacturing facilities, and retail spaces.

One of the main features of the SR 1700D is its dual brush system, which provides excellent cleaning performance on various floor surfaces. With a cleaning width of up to 34 inches, it can cover large areas quickly, reducing the time spent on cleaning tasks. The machine is equipped with two cylindrical brushes that rotate at high speeds, effectively removing dirt and debris while ensuring that surfaces are thoroughly scrubbed.

The SR 1700D is designed with user comfort and ease of operation in mind. Its intuitive controls allow operators to easily adjust settings such as brush pressure and water flow, minimizing the learning curve for new users. The spacious operator compartment ensures comfort during prolonged use, allowing staff to clean effectively without fatigue.

Technology plays a crucial role in the SR 1700D's design. Its eco-friendly cleaning solution management system allows users to optimize water and detergent usage, reducing environmental impact and operating costs. The machine also features a high-capacity recovery tank, which enables extended cleaning sessions without the need for frequent emptying.

Durability is another key characteristic of the SR 1700D. Constructed with high-quality materials, it is built to withstand the rigors of daily use in demanding environments. The machine's design incorporates protective features, such as impact-resistant bumpers, ensuring longevity and reducing maintenance needs.

In terms of mobility, the SR 1700D is equipped with robust wheels and a tight turning radius, allowing it to navigate through tight spaces and around obstacles with ease. This makes it an ideal choice for facilities with complex layouts.

Overall, the Nilfisk-Advance America SR 1700D 2W D is a powerful and efficient solution for commercial cleaning needs. Its combination of performance, user-friendly features, and advanced technology makes it a valuable asset for any organization looking to maintain cleanliness and hygiene in their facilities.
Top Page Image Contents