Craftsman 316.350850 warranty Kickback Safety Precautions, Maintain Your SAW in Good Working Order

Page 4

RULES FOR SAFE OPERATION

•Avoid accidental starting. Be in the starting position whenever pulling the starter rope. The operator and unit must be in a stable position while starting. See Starting/Stopping Instructions.

•Before you start the engine, make sure the area around the saw is clear. Never try to start the saw when the guide bar is engaged in a cut.

•Do not start cutting until you have a clear work area, secure footing, and a planned retreat path from the falling tree.

•Do not operate a chain saw that is damaged, improperly adjusted, or not completely and securely assembled. Be sure that the saw’s chain stops moving when the throttle control trigger is released.

•Shut off the engine before setting the chain saw down.

•Use extreme caution when cutting small-sized brush and saplings because slender material may catch the chain saw and whip towards you or cause you to lose control.

•When cutting a limb that is under tension, be alert for springback so that you will not be struck when the ten- sion in the wood fibers is released.

•Do not cut through nails, rods in the tree, railroad ties or pallets. Inspect a tree that you are going to cut for for- eign objects that could cause injury or damage to your chain saw.

•After striking a foreign object, stop the engine and thor- oughly inspect for damage. Repair as necessary.

•Keep the handles dry, clean and free of the oil/fuel mix- ture.

•We do not recommend using the chain saw in a tree or on a ladder.

MAINTAIN YOUR SAW IN GOOD WORKING ORDER

•All chain saw service, other than the items listed in this instruction manual maintenance instructions, should be performed by a Sears or other qualified service dealer.

•Make sure all fasteners are in place and secure.

•Unauthorized replacement parts or the removal of safety devices may cause damage to the unit and possible injury to the operator or bystanders. Use only Craftsman accessories and replacement parts as recommended. Never modify your saw.

•When not in use, saw should be stored in a dry, highly secure location away from children.

•When storing saw use a scabbard or carrying case.

HANDLE FUEL WITH CAUTION

•Do not smoke while handling fuel or while operating the saw.

•Always eliminate all sources of sparks or flame in areas where fuel is mixed or poured.

•Always mix and pour fuel in an outdoor area and use an approved, marked container for all fuels. Always wipe up all fuel spills before starting saw.

•When a chain saw is being used, a fire extinguisher should be available.

•Always move at least 10 feet (3 meters) from fueling site before starting saw.

•When re-fueling, turn the engine off and allow the saw to cool in a non-combustible area, do not place on dry leaves, straw, paper, etc. Slowly remove fuel cap and refuel unit.

•Always store the unit and fuel in a cool, dry, well-venti- lated space where fuel vapors cannot reach sparks or open flames from water heaters, electric motors or switches, furnaces, etc.

•All chain saw service, other that the items listed in this instruction manual maintenance instructions, should be performed by a Sears or other qualified service dealer.

•Use the right tool. Only use this chain saw for its intend- ed purpose, to cut wood.

•Never touch the chain or attempt to service the saw while the engine is running. Make sure all moving parts have stopped. Allow the chain saw to cool, as the chain can be hot.

•Check the bar and chain at frequent intervals for proper adjustment. Make sure the bar and chain are properly tightened and sharpened. Visually inspect for damage. Repair any damage before restarting or operating the chain saw.

WARNING: KICKBACK may occur when the

nose or tip of the guide bar touches an object, or when the wood closes in and pinches the saw chain in the cut. Tip con- tact in some cases may cause a lightning- fast reverse reaction, kicking the guide bar up and back towards the operator. Pinching the saw chain along the top of the guide bar may push the guide bar rapidly back toward the operator. Either of these reactions may cause you to lose control of the saw, which could result in serious personal injury. Do not rely exclusively upon the safety devices built into your saw. As a chain saw user, you should take several steps to keep your cutting jobs free from accident or injury.

KICKBACK SAFETY PRECAUTIONS

•With a basic understanding of kickback, you can reduce or eliminate the element of surprise. Sudden surprise contributes to accidents. Be alert to the potential for kickback at all times.

•Keep a good firm grip on the saw with both hands, the right hand on the rear handle and the left hand on the front handle, when the engine is running. Use a firm grip with thumbs and fingers encircling the chain saw handles. A firm grip will help you reduce kickback and maintain control of the saw. Don’t let go.

4

Page 3 Page 5
Image 4
Page 3 Page 5
Contents Operator’s Manual 55cc 2-CycleTable of Contents Warranty StatementRules for Safe Operation Symbol MeaningOperate Your SAW Safely Maintain Your SAW in Good Working Order Kickback Safety PrecautionsHandle Fuel with Caution Other Safety Precautions Fuel SafetySafety and International Symbols Symbol MeaningSafety Features Chain SAW ComponentsKickback Specifics Pinch KickbackUsing Blended Fuels Using Fuel AdditivesOIL and Fuel Information OIL and Fuel Mixing InstructionsSTARTING/STOPPING Instructions Guide BAR and Chain OILFueling the Engine Chain BrakeStarting a Cold Engine Stopping InstructionsStarting a Warm Engine Chain Lubrication Chain Brake TestAutomatic Oiler Operating Instructions FellingLimbing Bucking Using a SawhorseBucking Maintenance and Repair Instructions Removing Guide BAR and Chain Replacing Guide BAR and ChainSAW Chain Tension Adjustment Chain Brake Mechanical TestMaintenance Requirements Check for Damaged or Worn Parts AIR FilterFuel Filter Check for Loose Fasteners and PartsCarburetor Adjustment OIL FilterSpark Arrester Screen Spark PlugGuide BAR Maintenance Storing a Chain SAWRemoving a Unit from Storage SAW Chain / BAR LubricationChain Replacement Information Chain MaintenanceInertia Chain Brake Action Troubleshooting U S ET I O N U SESpecifications EngineParts List Parts No DescriptionOwner’s Warranty Responsibilities Your Warranty Rights and ObligationsManufacturer’s Warranty Coverage Page Manual del usuario 55cc 2 TiemposÍndice Declaración DE GarantíaAviso DE LA Proposición 65 DE CALI- Fornia Nota Sobre EL Aspirador DE ChispasAdvertencia Si no se obe Precaución Si no obedeceReglas DE Funcionamiento Seguro Opere SU Sierra DE Forma SeguraManeje EL Combustible CON Cuidado Mantenga SU Sierra EN Buen Estado DE FuncionamientoPrecauciones DE Seguridad Ante REAC- Ciones Violentas Otras Precauciones DE Seguridad Seguridad DE CombustibleAdvertencia Lea el Advertencia LosAdvertencia El con Seguridad Y Símbolos InternacionalesComponentes DE LA Sierra Características DE SeguridadEspecificaciones DE Reacción Advertencia Kickback canReacción de pellizcado Precaución cionamiento Advertencia La gasolina esAdvertencia Quite la tapa Advertencia Añada comInstrucciones DE MARCHA/PARADA Instrucciones DE Parada Arrancar UN Motor FríoArrancar UN Motor Caliente Comprobación DE Freno DE CadenaLubricado de la Cadena Lubricador automáticoAdvertencia una ruta de Advertencia Nunca camineAdvertencia No corte un Instrucciones DE FuncionamientoTroceado PelarTrocear Utilizando UN Caballete Advertencia daños serios Instrucciones DE Mantenimiento Y ReparaciónQuitar LA Barra DE Guía Y LA Cadena Reemplazar LA Barra Y LA CadenaPrecaución Si la cadena Advertencia Freno deAjuste DE Tensión DE LA Sierra Mecánica Comprobación Mecánica DEL Freno DE SierraFiltro DE Combustible Filtro DE AireCompruebe LAS Tuercas O Componentes Sueltos Advertencia No abrase ni Filtro DE AceitePantalla DEL Aspirador DE Chispas BujíaAlmacenar LA Sierra Recuperar LA Unidad Tras EL ALMACE- NamientoMantenimiento DE LA Barra DE Guía Lubricado del engranajeAdvertencia más de U S a Resolución DE ProblemasC I Ó N Especificaciones MotorLista DE Componentes Componente DescripciónResponsabilidades del propietario de la garantía Sus derechos y obligaciones de garantíaCobertura de la Garantía del Fabricante Acuerdo de Protección de Reparaciones Arrglelo, en su casa o en la nuestra

316.350850 specifications

The Craftsman 316.350850 is a powerful and versatile tool that has gained popularity among DIY enthusiasts and professionals alike. Designed to cater to a variety of tasks, this product embodies a blend of efficiency, durability, and ease of use, making it a valuable addition to any tool collection.

One of the standout features of the Craftsman 316.350850 is its robust motor, which delivers impressive performance for cutting, shaping, and finishing materials. With a high RPM rating, it effectively handles a diverse range of tasks, whether it’s woodworking, metalworking, or general maintenance projects. The tool's motor is engineered for longevity, ensuring that it can withstand regular use without compromising performance.

The ergonomic design of the Craftsman 316.350850 is another highlight. The handle is crafted to provide comfortable grip and control, allowing users to operate the tool for extended periods without experiencing fatigue. Additionally, the tool’s lightweight construction enhances maneuverability, allowing for precise cuts and actions, even in tight spaces.

Equipped with advanced technology, the Craftsman 316.350850 incorporates safety features that prioritize user protection. These include a safety switch that prevents accidental start-ups, reducing the risk of injury. Moreover, the tool has built-in overheating protection, which monitors the motor temperature and automatically shuts off to prevent damage.

Another key characteristic is the tool's versatility. It comes with a variety of attachments and accessories that can be easily swapped out to accommodate different tasks. Whether you're sanding, grinding, or polishing, the Craftsman 316.350850 adapts quickly to meet the demands of the job at hand.

Maintenance of the Craftsman 316.350850 is hassle-free, thanks to its accessible design, which allows for easy cleaning and part replacement. The tool is also backed by a solid warranty, giving users confidence in their purchase and the assurance of support if issues arise.

In conclusion, the Craftsman 316.350850 stands out as a reliable, efficient, and user-friendly tool. Its powerful motor, ergonomic design, advanced safety features, and versatility make it a superb choice for anyone looking to tackle a range of projects with precision and ease. Whether for professional applications or home improvement tasks, this tool is designed to meet the challenges of modern craftsmanship.
Top Page Image Contents