Craftsman 316.350850 warranty OIL and Fuel Information, OIL and Fuel Mixing Instructions

Page 9

OIL AND FUEL INFORMATION

OIL AND FUEL MIXING INSTRUCTIONS

Old and/or improperly mixed fuel are the main reasons for the unit not running properly. Be sure to use fresh (less than 60 days old) clean unleaded fuel. Follow the instruc- tions carefully for the proper fuel/oil mixture.

Definition of Blended Fuels

Today's fuels are often a blend of gasoline and oxy- genates such as ethanol, methanol, or MTBE (ether). Alcohol-blended fuel absorbs water. As little as 1% water in the fuel can make fuel and oil separate and lead to for- mation of acids during storage. When using alcohol- blended fuel, use fresh fuel.

Using Blended Fuels

If you choose to use a blended fuel, or its use is unavoid- able, follow recommended precautions:

•Always use the fresh fuel mix explained in your opera- tor's manual

•Always shake the fuel mix before fueling the unit

•Drain the tank and run the engine dry before storing the unit

Using Fuel Additives

The bottle of 2-cycle oil that came with your unit contains a fuel additive which will help inhibit corrosion and mini- mize the formation of gum deposits. It is recommended that you use our 2-cycle oil with this unit.

If unavailable, use a good 2-cycle oil designed for air-cooled engines along with a fuel additive, such as STA-BIL®Gas Stabilizer or an equivalent. Add 0.8 oz.

(23 ml.) of fuel additive per gallon of fuel according to the instructions on the container. NEVER add fuel additives directly to the unit's fuel tank.

CAUTION: For proper engine operation and maxi-

mum reliability, pay strict attention to the oil and fuel mixing instructions on the 2-cycle oil container. Using improperly mixed fuel can severely damage the engine.

To Obtain Correct Fuel Mix:

Thoroughly mix the proper ratio of 2-cycle engine oil with unleaded gasoline in a separate fuel can. Use a 40:1 fuel/oil ratio. Do not mix them directly in the engine fuel tank. See the table below for specific gas and oil mixing ratios.

NOTE: One gallon (3.8 liters) of unleaded gasoline mixed with one 3.2 oz. (95 ml.) bottle of

2-cycle oil makes a 40:1 fuel/oil ratio.

 

 

 

 

 

 

 

 

 

 

 

 

 

+

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

UNLEADED GAS

 

 

2 CYCLE OIL

 

 

 

 

1 GALLON US

 

 

3.2 FL. OZ.

 

(3.8 LITERS)

 

 

(95 ml)

 

 

 

 

 

 

 

 

1 LITER

 

 

25 ml

 

 

 

 

 

 

 

 

MIXING RATIO - 40:1

WARNING: Gasoline is extreme- ly flammable. Ignited

Vapors may explode. Always stop the engine and allow it to cool before filling the fuel tank. Do not smoke while filling the tank. Keep sparks and open flames at a distance from the area.

WARNING: Remove fuel cap slowly to avoid injury

from fuel spray. Never operate the unit without the fuel cap securely in place.

WARNING: Add fuel in a clean, well ventilated out-

door area. Wipe up any spilled fuel immedi- ately. Avoid creating a source of ignition for spilled fuel. Do not start the engine until fuel vapors dissipate.

NOTE: Dispose of the old fuel/oil mix in accordance to Federal, State and Local regulations.

9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents 55cc 2-Cycle Operator’s ManualWarranty Statement Table of ContentsSymbol Meaning Rules for Safe OperationOperate Your SAW Safely Kickback Safety Precautions Maintain Your SAW in Good Working OrderHandle Fuel with Caution Fuel Safety Other Safety PrecautionsSymbol Meaning Safety and International SymbolsChain SAW Components Safety FeaturesPinch Kickback Kickback SpecificsUsing Fuel Additives Using Blended FuelsOIL and Fuel Information OIL and Fuel Mixing InstructionsGuide BAR and Chain OIL STARTING/STOPPING InstructionsFueling the Engine Chain BrakeStopping Instructions Starting a Cold EngineStarting a Warm Engine Chain Brake Test Chain LubricationAutomatic Oiler Felling Operating InstructionsBucking Using a Sawhorse LimbingBucking Maintenance and Repair Instructions Replacing Guide BAR and Chain Removing Guide BAR and ChainChain Brake Mechanical Test SAW Chain Tension AdjustmentAIR Filter Maintenance Requirements Check for Damaged or Worn PartsFuel Filter Check for Loose Fasteners and PartsOIL Filter Carburetor AdjustmentSpark Arrester Screen Spark PlugStoring a Chain SAW Guide BAR MaintenanceRemoving a Unit from Storage SAW Chain / BAR LubricationChain Maintenance Chain Replacement InformationInertia Chain Brake Action U S E TroubleshootingT I O N U SEEngine SpecificationsParts No Description Parts ListYour Warranty Rights and Obligations Owner’s Warranty ResponsibilitiesManufacturer’s Warranty Coverage Page 55cc 2 Tiempos Manual del usuarioDeclaración DE Garantía ÍndiceAviso DE LA Proposición 65 DE CALI- Fornia Nota Sobre EL Aspirador DE ChispasPrecaución Si no obedece Advertencia Si no se obeReglas DE Funcionamiento Seguro Opere SU Sierra DE Forma SeguraMantenga SU Sierra EN Buen Estado DE Funcionamiento Maneje EL Combustible CON CuidadoPrecauciones DE Seguridad Ante REAC- Ciones Violentas Seguridad DE Combustible Otras Precauciones DE SeguridadAdvertencia Los Advertencia Lea elAdvertencia El con Seguridad Y Símbolos InternacionalesCaracterísticas DE Seguridad Componentes DE LA SierraAdvertencia Kickback can Especificaciones DE ReacciónReacción de pellizcado Advertencia La gasolina es Precaución cionamientoAdvertencia Quite la tapa Advertencia Añada comInstrucciones DE MARCHA/PARADA Arrancar UN Motor Frío Instrucciones DE ParadaComprobación DE Freno DE Cadena Arrancar UN Motor CalienteLubricado de la Cadena Lubricador automáticoAdvertencia Nunca camine Advertencia una ruta deAdvertencia No corte un Instrucciones DE FuncionamientoPelar TroceadoTrocear Utilizando UN Caballete Instrucciones DE Mantenimiento Y Reparación Advertencia daños seriosReemplazar LA Barra Y LA Cadena Quitar LA Barra DE Guía Y LA CadenaAdvertencia Freno de Precaución Si la cadenaAjuste DE Tensión DE LA Sierra Mecánica Comprobación Mecánica DEL Freno DE SierraFiltro DE Aire Filtro DE CombustibleCompruebe LAS Tuercas O Componentes Sueltos Filtro DE Aceite Advertencia No abrase niPantalla DEL Aspirador DE Chispas BujíaRecuperar LA Unidad Tras EL ALMACE- Namiento Almacenar LA SierraMantenimiento DE LA Barra DE Guía Lubricado del engranajeAdvertencia más de Resolución DE Problemas U S aC I Ó N Motor EspecificacionesComponente Descripción Lista DE ComponentesSus derechos y obligaciones de garantía Responsabilidades del propietario de la garantíaCobertura de la Garantía del Fabricante Acuerdo de Protección de Reparaciones Arrglelo, en su casa o en la nuestra

316.350850 specifications

The Craftsman 316.350850 is a powerful and versatile tool that has gained popularity among DIY enthusiasts and professionals alike. Designed to cater to a variety of tasks, this product embodies a blend of efficiency, durability, and ease of use, making it a valuable addition to any tool collection.

One of the standout features of the Craftsman 316.350850 is its robust motor, which delivers impressive performance for cutting, shaping, and finishing materials. With a high RPM rating, it effectively handles a diverse range of tasks, whether it’s woodworking, metalworking, or general maintenance projects. The tool's motor is engineered for longevity, ensuring that it can withstand regular use without compromising performance.

The ergonomic design of the Craftsman 316.350850 is another highlight. The handle is crafted to provide comfortable grip and control, allowing users to operate the tool for extended periods without experiencing fatigue. Additionally, the tool’s lightweight construction enhances maneuverability, allowing for precise cuts and actions, even in tight spaces.

Equipped with advanced technology, the Craftsman 316.350850 incorporates safety features that prioritize user protection. These include a safety switch that prevents accidental start-ups, reducing the risk of injury. Moreover, the tool has built-in overheating protection, which monitors the motor temperature and automatically shuts off to prevent damage.

Another key characteristic is the tool's versatility. It comes with a variety of attachments and accessories that can be easily swapped out to accommodate different tasks. Whether you're sanding, grinding, or polishing, the Craftsman 316.350850 adapts quickly to meet the demands of the job at hand.

Maintenance of the Craftsman 316.350850 is hassle-free, thanks to its accessible design, which allows for easy cleaning and part replacement. The tool is also backed by a solid warranty, giving users confidence in their purchase and the assurance of support if issues arise.

In conclusion, the Craftsman 316.350850 stands out as a reliable, efficient, and user-friendly tool. Its powerful motor, ergonomic design, advanced safety features, and versatility make it a superb choice for anyone looking to tackle a range of projects with precision and ease. Whether for professional applications or home improvement tasks, this tool is designed to meet the challenges of modern craftsmanship.
Top Page Image Contents