Craftsman 316.350850 warranty Other Safety Precautions, Fuel Safety

Page 5

RULES FOR SAFE OPERATION

•Make sure that the area in which you are cutting is free from obstructions. Do not let the nose of the guide bar contact a log, branch, fence, or any other obstruction that could be hit while you are operating the saw.

•Always cut with the engine running at full speed. Fully squeeze the throttle trigger and maintain a steady cut- ting speed.

•Use only the correct original equipment manufacturer replacement bars, chains and other parts and acces- sories. These are available from a Sears or other quali- fied service dealer. Use of any unauthorized parts or accessories could lead to serious injury to the user, or damage to the unit, and will void your warranty.

•Follow the manufacturer’s sharpening and maintenance instructions for the saw chain.

•Use only the replacement guide bars and low kickback chains specified for your saw to avoid injury.

•Watch for shifting logs or other forces that could pinch or fall into chain.

•Always have saw at full speed when entering a previous cut. Always use caution when entering a previous cut.

using the saw.

•Shut off the engine before setting down the saw. Do not leave the engine running unattended.

•Never store the unit, with fuel in the tank, inside a build- ing where fumes may reach an open flame or spark.

•Allow the engine to cool before storing or transporting the chain saw over long distances. For example, let the engine cool before placing the chain saw in an automo- bile. Also, be sure to secure the unit while transporting.

•Store the unit in a dry area, locked up, located up high and located out of the reach of children to prevent unauthorized use or damage.

•Never douse or squirt the unit with water or any other liquid. Keep handles dry, clean and free from debris. Clean after each use.

•Keep these instructions. Refer to them often and use them to instruct other users. If you loan someone this unit, also loan them the instructions.

•Do not use the unit in the rain, in a storm or in inclement weather.

• Do not start a cut using the tip of the saw.

OTHER SAFETY PRECAUTIONS

•Do not operate a chain saw with one hand! Serious injury to the operator, helpers, bystanders, or any com- bination of these persons may result from one-handed operation. A chain saw is intended for two-handed use.

•Do not operate a chain saw if you are fatigued.

•Use safety footwear; snug-fitting clothing; protective gloves; and eye, hearing, and head protection devices.

•Do not allow other persons to be near the chain saw when starting or cutting with the chain saw. Keep bystanders and animals out of the work area.

•Do not remove, damage or de-activate any of the safety devices. Never use a damaged, modified, or improperly repaired or assembled chain saw. Check their proper operation regularly. Only use bars and chains of the length indicated in the table herein.

•Never carry out operations or repairs on your own that are other than routine maintenance as listed in this manual.

•Use caution when felling a tree. Make sure you have planned an escape path when felling, and keep all bystanders away.

•Be alert; stop the machine if anyone enters the cutting area, which is usually 3 to 4 feet around the operator.

•Use caution when working in a crew to avoid injury to a fellow worker who may enter the cutting area.

•Only loan your saw to experienced users who are com- pletely familiar with saw operation and correct use. Give other users this manual, which they should read before

FUEL SAFETY

•Store fuel only in containers specifically designed and approved for the storage of such materials.

•Always stop the engine and allow it to cool before filling the fuel tank. Never remove the cap of the fuel tank, or add fuel, when the engine is hot. Never operate the unit without the fuel cap securely in place. Loosen the fuel tank cap slowly to relieve any pressure in the tank.

•Add fuel in a clean, well-ventilated outdoor area where there are no sparks or flames. Slowly remove the fuel cap only after stopping engine. Do not smoke while fuel- ing or mixing fuel. Wipe up any spilled fuel from the unit immediately.

WARNING: Gasoline is highly flammable, and its

vapors can explode if ignited. Take the follow- ing precautions:

•Avoid creating a source of ignition for spilled fuel. Do not start the engine until fuel vapors dissipate.

•Move the unit at least 30 feet (9.1 m) from the fueling source and site before starting the engine. Do not smoke. Keep sparks and open flames away from the area while adding fuel or operating the unit.

SAVE THESE INSTRUC-

TIONS

5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents 55cc 2-Cycle Operator’s ManualWarranty Statement Table of ContentsOperate Your SAW Safely Symbol MeaningRules for Safe Operation Handle Fuel with Caution Kickback Safety PrecautionsMaintain Your SAW in Good Working Order Fuel Safety Other Safety PrecautionsSymbol Meaning Safety and International SymbolsChain SAW Components Safety FeaturesPinch Kickback Kickback SpecificsUsing Fuel Additives Using Blended FuelsOIL and Fuel Information OIL and Fuel Mixing InstructionsGuide BAR and Chain OIL STARTING/STOPPING InstructionsFueling the Engine Chain BrakeStarting a Warm Engine Stopping InstructionsStarting a Cold Engine Automatic Oiler Chain Brake TestChain Lubrication Felling Operating InstructionsBucking Bucking Using a SawhorseLimbing Maintenance and Repair Instructions Replacing Guide BAR and Chain Removing Guide BAR and ChainChain Brake Mechanical Test SAW Chain Tension AdjustmentAIR Filter Maintenance Requirements Check for Damaged or Worn PartsFuel Filter Check for Loose Fasteners and PartsOIL Filter Carburetor AdjustmentSpark Arrester Screen Spark PlugStoring a Chain SAW Guide BAR MaintenanceRemoving a Unit from Storage SAW Chain / BAR LubricationInertia Chain Brake Action Chain MaintenanceChain Replacement Information U S E TroubleshootingT I O N U SEEngine SpecificationsParts No Description Parts ListManufacturer’s Warranty Coverage Your Warranty Rights and ObligationsOwner’s Warranty Responsibilities Page 55cc 2 Tiempos Manual del usuarioDeclaración DE Garantía ÍndiceAviso DE LA Proposición 65 DE CALI- Fornia Nota Sobre EL Aspirador DE ChispasPrecaución Si no obedece Advertencia Si no se obeReglas DE Funcionamiento Seguro Opere SU Sierra DE Forma SeguraPrecauciones DE Seguridad Ante REAC- Ciones Violentas Mantenga SU Sierra EN Buen Estado DE FuncionamientoManeje EL Combustible CON Cuidado Seguridad DE Combustible Otras Precauciones DE SeguridadAdvertencia Los Advertencia Lea elAdvertencia El con Seguridad Y Símbolos InternacionalesCaracterísticas DE Seguridad Componentes DE LA SierraReacción de pellizcado Advertencia Kickback canEspecificaciones DE Reacción Advertencia La gasolina es Precaución cionamientoAdvertencia Quite la tapa Advertencia Añada comInstrucciones DE MARCHA/PARADA Arrancar UN Motor Frío Instrucciones DE ParadaComprobación DE Freno DE Cadena Arrancar UN Motor CalienteLubricado de la Cadena Lubricador automáticoAdvertencia Nunca camine Advertencia una ruta deAdvertencia No corte un Instrucciones DE FuncionamientoTrocear Utilizando UN Caballete PelarTroceado Instrucciones DE Mantenimiento Y Reparación Advertencia daños seriosReemplazar LA Barra Y LA Cadena Quitar LA Barra DE Guía Y LA CadenaAdvertencia Freno de Precaución Si la cadenaAjuste DE Tensión DE LA Sierra Mecánica Comprobación Mecánica DEL Freno DE SierraCompruebe LAS Tuercas O Componentes Sueltos Filtro DE AireFiltro DE Combustible Filtro DE Aceite Advertencia No abrase niPantalla DEL Aspirador DE Chispas BujíaRecuperar LA Unidad Tras EL ALMACE- Namiento Almacenar LA SierraMantenimiento DE LA Barra DE Guía Lubricado del engranajeAdvertencia más de C I Ó N Resolución DE ProblemasU S a Motor EspecificacionesComponente Descripción Lista DE ComponentesCobertura de la Garantía del Fabricante Sus derechos y obligaciones de garantíaResponsabilidades del propietario de la garantía Acuerdo de Protección de Reparaciones Arrglelo, en su casa o en la nuestra

316.350850 specifications

The Craftsman 316.350850 is a powerful and versatile tool that has gained popularity among DIY enthusiasts and professionals alike. Designed to cater to a variety of tasks, this product embodies a blend of efficiency, durability, and ease of use, making it a valuable addition to any tool collection.

One of the standout features of the Craftsman 316.350850 is its robust motor, which delivers impressive performance for cutting, shaping, and finishing materials. With a high RPM rating, it effectively handles a diverse range of tasks, whether it’s woodworking, metalworking, or general maintenance projects. The tool's motor is engineered for longevity, ensuring that it can withstand regular use without compromising performance.

The ergonomic design of the Craftsman 316.350850 is another highlight. The handle is crafted to provide comfortable grip and control, allowing users to operate the tool for extended periods without experiencing fatigue. Additionally, the tool’s lightweight construction enhances maneuverability, allowing for precise cuts and actions, even in tight spaces.

Equipped with advanced technology, the Craftsman 316.350850 incorporates safety features that prioritize user protection. These include a safety switch that prevents accidental start-ups, reducing the risk of injury. Moreover, the tool has built-in overheating protection, which monitors the motor temperature and automatically shuts off to prevent damage.

Another key characteristic is the tool's versatility. It comes with a variety of attachments and accessories that can be easily swapped out to accommodate different tasks. Whether you're sanding, grinding, or polishing, the Craftsman 316.350850 adapts quickly to meet the demands of the job at hand.

Maintenance of the Craftsman 316.350850 is hassle-free, thanks to its accessible design, which allows for easy cleaning and part replacement. The tool is also backed by a solid warranty, giving users confidence in their purchase and the assurance of support if issues arise.

In conclusion, the Craftsman 316.350850 stands out as a reliable, efficient, and user-friendly tool. Its powerful motor, ergonomic design, advanced safety features, and versatility make it a superb choice for anyone looking to tackle a range of projects with precision and ease. Whether for professional applications or home improvement tasks, this tool is designed to meet the challenges of modern craftsmanship.
Top Page Image Contents