MODEL 2230R, Process Hydrogen Analyzer
Serial
Communication
Commands
The unit can be communicated with and configured via the use of commands as described below. Two levels of communication outputs are available:
∙Level 0 – Default level used for data monitoring and basic functions providing a continuous stream of data readings
∙Level 1 – Password protected level used for configuration of
Command Summary
The RETURN or ENTER key is the last character of the command string. If either key is pressed without a command string the result is an invalid command and will resume continuous display if in Level 0 or return to prompt if in Level 1.
Keystroke
ESC
sp(spacebar)
A
C
=<password>
Level 0 Commands
Description
Stops continuous display to enter a password or command. If in level zero, the continuous display will resume after executing one command.
Pressing the Space key while the serial output is active will display a label line showing the heading for each column of data.
Average readings.
Clear peak hydrogen value.
Enter the password to change security level. A null or invalid password returns to the default security level.
Level 0 password = “0” Level 1 password = “h2scan”
Keystroke
A <R1> <R2>
C
D <page>
Level 1 Commands
Description
Set the R1 and R2 set points for the relay contacts in %H₂.
Clear peak hydrogen value.
Display Product Information. Enter page number
0 – Product information
1 – User configuration
2 – Manufacturing information
3 – Product configuration
4 – Sensor characterization data
5 – Hydrogen calibration data
Page 16