Whirlwind WW60-10001 manual Discharge Chute Installation

Page 72

ASSEMBLY

ASSEMBLY

DISCHARGE CHUTE INSTALLATION

DANGER Keep away. To avoid serious injury or death from thrown objects or blade contact, never operate mower without discharge chute in place.

Attach discharge chute (1) to mower platform using four 3/8" x 3/4" bolts (2) and 3/4" locknuts (3) as shown.

FIGURE 5.

3

1

FIGURE 5

Discharge Chute Installation

2

DRIVELINE ATTACHMENT - To Gearbox

1.Insert yoke onto splined shaft. Twist red collar on end yoke.

2.Slide yoke (with collar twisted) onto gearbox shaft.

3.Move yoke back and forth until collar clicks and locks the yoke in place.

WHIRLWIND 08/01	Assembly Section 3-4
© 2004 Alamo Group Inc.

Image 72

Contents Whirlwind To the OWNER/OPERATOR/DEALER Safety Training Makes the Difference Page Table of Contents Page Safety Section Safety Whirlwind 08/01¡LEA EL Instructivo SGM-11 SG-12 By the following rules Mowing All Safety Shields, Guards and Safety devices including Stop Mowing if Passersby are Within 100 Yards Unless Wait a minute...Save a life Parts Information See Your SERVIS-RHINO DealerQTY Level Description Not Shown See Inside Front Cover of Manual D103 WW72 Safety Federal Laws and Regulations DutiesPage Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Introduction Section Introduction Introduction Before Operating this Machine Assembly Section Exceed Horsepower Recommendations Dealer SET-UP Instructions Frame AttachmentST Extended Position 2ND Extended PositionCaster WHEEL6 Attachments Discharge Chute Installation Operation Section Tractor Preparation Attaching Mower to Tractor Lift TypeCutting Height Adjustment Driveline Attachment to TractorStarting & Stopping Cutter Cutting Speed Cutting TipsSide Discharge Driveline Length Check Procedure Detaching and StoringBefore Operating or Transporting this Mower Colored TapeDriveline Length Front Gauge Wheel Interference CheckProblem Possible Cause Remedy Belt Slippage Belt RolloverDamaged Belt Belt BreakageMaintenance Section Lubrication Information Lubrication Fitting LocationDescription Frequency Gearbox Gauge Wheel AssembliesDriveline Lubrication Blade Spindle LubricationBlade Installation Blade ServicingBlade Sharpening Follow Original Pattern Maintain CornerBelt Adjustment Procedure Figure Storage Proper Torque for FastenersDisassembly AssemblyPage SERVIS-RHINO Required of the Owner Required of the OperatorMODEL-OMWPL-08/01 RHINO-SERVIS SERVIS-RHINOWARRANTY Registration Information Page Dealer Copy Page Customer Copy