Woods Equipment S105-3, S106-3, S105Q-3, S106Q-3 manual Tailwheel Assembly

TAILWHEEL ASSEMBLY

REF	PART		QTY	DESCRIPTION
1	12577		1	4 x 8 Tire w/rim 5" wide
2	11131		1	Tailwheel yoke with 1" hole & offset
				side arm (used with light #2302 hub
				assembly only)
2	15580		1	Tailwheel clevis
3	4674		1	3/8 x 2 Spirol pin
4	11011		2	1-1/2 x 1-5/8 x 1-1/2 Bronze bushing
5	1972	*	1	1/4 - 28 Tapered thread grease fitting
6	12436		1	Tailwheel arm asy (incl bushings)
7	11872		2	3/4 x 11-1/16 Clevis pin
8	1285	*	4	1/4 x 1-1/2 Cotter pin
9	3097		1	5/8 NC x 4-1/2 HHCS GR5
10	12006		3	5/8 Elastic stop nut
11	12443		1	Tailwheel attachment guide cup asy
12	12449		1	Tailwheel spring housing asy
13	10260		2	1/2 x 6-1/2 Compression spring
14	12447		2	5/8 x 3 x 7 GA Hat washer
15	11043		2	5/8 NC x 7-1/2 HHCS GR5
16	12889		1	3/32 x 1-9/16 OD O-ring
17	12881		1	Tailwheel cap washer

REF	PART		QTY	DESCRIPTION
18	12907		1	1-1/2 Schedule 40 x 2-3/16 pipe
				(used on heavy yoke only)
19	1257	*	4	3/4 Standard flat washer
20	484		2	5/8 x 1 x 7/16 HT Sleeve
21	692	*	2	5/8 Standard flat washer
22	15277		1	Wheel hub assembly (includes items
				21,22,23)
23	314		1	Seal for 1-1/2 shaft
24	310		1	Bearing cone
25	309		1	Bearing cup
26	15087		1	1 NC x 9.0 Cap screw GR5
27	15573		1	Sleeve, 1.0 ID x 1.25 OD 5.81
28	15575		1	Sleeve, 1.25 ID x 1.50 OD x 1.86
29	15574		1	Sleeve, 1.75 ID x 1.50 OD x .903
30	855	*	4	1/2 Lock washer
31	4119		4	1/2 NF x 2 Cap screw GR5
32	1386		1	1" NC Jam nut
33	34279		1	1" NC Lock nut
		*		Standard hardware, obtain locally

29977 (Rev. 1/23/2009) Parts 51