SPECIFICATIONS
| S105 | S105Q | S106 | S106Q |
Cutting Width | 60" | 60" | 72" | 72" |
PTO Speed (rpm) | 540 | 1000 | 540 | 1000 |
Blade Tip Speed (feet per minute) | 11,451 | 14,137 | 10,178 | 12,566 |
Minimum Tractor Weight Recommended | 4000 lbs | 4000 lbs | 5000 lbs | 5000 lbs |
Minimum Tractor HP Recommended | 40 HP | 40 HP | 50 HP | 50 HP |
Minimum | 2500 lbs | 2500 lbs | 3000 lbs | 3000 lbs |
Cutting Height (Depending on
Offset from Centerline Tractor PTO to Inside Edge of Cut (Approximate) . . . . . . . . . . . . . . . . . . . . . . . . . . . 63"
Transport Width from Centerline PTO to Right Side with Head Raised (Approximate) . . . . . . . . . . . . . . . . . 70"
GENERAL INFORMATION
WARNING
Some illustrations in this manual show the cut- ter with safety shields removed to provide a better view. The cutter should never be operated with any safety shielding removed.
The purpose of this manual is to assist you in operating and maintaining your cutter. Read it carefully. It fur- nishes information and instructions that will help you achieve years of dependable performance. These instructions have been compiled from extensive field experience and engineering data. Some information may be general in nature due to unknown and varying
operating conditions. However, through experience and these instructions, you should be able to develop procedures suitable to your particular situation.
The illustrations and data used in this manual were cur- rent at the time of printing, but due to possible inline production changes, your machine may vary slightly in detail. We reserve the right to redesign and change the machines as may be necessary without notification.
Throughout this manual, references are made to right and left directions. These are determined by standing behind the equipment facing the direction of forward travel. Blade rotation is clockwise as viewed from the top of the cutter.
4 Introduction | 29977 (Rev. 11/23/2009) |
|