Woods Equipment BW2400XQ, BW1620XQREV manual Safety

Page 12

SAFETY & INSTRUCTIONAL DECALS

ATTENTION! BECOME ALERT! YOUR SAFETY IS INVOLVED!

Replace Immediately If Damaged!

(Safety Decals continued from previous page)

WARNING

DO NOT EXCEED PTO SPEED OF

1000 RPM

PTO speeds higher than 1000 RPM can cause equipment failure and

personal injury.

15922-C

 

5 - PN 15922

WARNING￿￿￿￿￿￿ ￿￿￿￿￿

￿￿￿￿￿￿￿￿￿￿￿￿540￿￿￿￿￿￿￿￿￿￿RPM￿￿￿￿!￿￿￿￿￿"￿￿#￿￿￿￿￿$

OR

6 - PN 18866

18866-D

DANGER

ROTATING BLADES AND

THROWN OBJECTS

Do not put hands or feet under or into mower when engine is running.

Before mowing, clear area of objects that may be thrown by blade.

Keep bystanders away.

Keep guards in place and in good condition.

BLADE CONTACT OR THROWN OBJECTS CAN CAUSE SERIOUS INJURY OR DEATH.

15503-C

 

7 - PN 15503

8 - PN 18864

9 - PN 18865

 

DANGER

ROTATING DRIVELINE

CONTACT CAN CAUSE DEATH

KEEP AWAY!

DO NOT OPERATE WITHOUT -

All driveline guards, tractor and equipment shields in place

Drivelines securely attached at both ends

Driveline guards that turn freely on

driveline18864-C

WARNING

FALLING OFF CAN RESULT IN BEING RUN OVER.

„Tractor must be equipped with ROPS (or ROPS CAB) and seat belt. Keep foldable ROPS systems in “locked up” position at all times.

„Buckle Up! Keep seat belt securely fastened.

„Allow no riders.

RAISED EQUIPMENT CAN DROP AND CRUSH.

„Before working underneath, follow all instructions and safety rules in operator’s manual and securely block up all corners of equipment with jack stands.

„Securely blocking prevents equipment dropping from hydraulic leak- down, hydraulic system failures or mechanical component failures.

FALLING OFF OR FAILING TO BLOCK SECURELY CAN

RESULT IN SERIOUS INJURY OR DEATH.

18865--C

11 - PN 19924

19924-B

￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿WARNING￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿

Check for leaks with cardboard; never use hand.

Before loosening fittings: lower load, release pressure, and

￿be sure oil is cool.

Consult physician immediately if skin penetration occurs.

12 Safety

MAN0764 (11/5/2008)

 

 

Image 12
Contents MAN0764 Introduction To the DealerTable of Contents Specifications General InformationBW1620X, BW1620XQ BW2400X, BW2400XQFree Mower Safety Video SafetyTraining Package for Rotary Mowers/Cutters-English Training Package for Rotary Mowers/Cutters-English/SpanishSafety Rules InstallationTraining PreparationTransportation Operation Maintenance Storage Safety & Instructional Decals Be CarefulPN 1006348 located on split rim wheels Safety Safety Connecting Cutter to Tractor OperationOperation Cutting Height Adjustment Hydraulic ConnectionInterference Check CV Driveline Turning LimitsAttitude Rod Adjustment Figure Tractor OperationCutter Operation Cutting Height Normal Mowing WingsMowing Tips TransportingShredding Lock-UpPRE-OPERATION Check List Wing Lock-Up FigureCenter Section Lock-Up Figure Owner Service Owner ServiceBlocking Method Lubrication Gearbox LubricationDriveline Lubrication Description FrequencyBlade Installation Figure Seasonal LubricationBlades Blade Removal FigureSlip Clutch Adjustment Figure Blade Sharpening FigureRepairing Rubber Shielding Repairing Optional Chain ShieldingCleaning Shielding RepairTroubleshooting TroubleshootingDealer Service Dealer ServiceSeal Replacement Figure Vertical Shaft Seal Replacement FigureWing & Center Gearbox Repair Gearbox Wing & Center Gearbox Installation Figure Splitter Gearbox Disassembly FigureSplitter Gearbox Repair Figure Splitter Gearbox Removal Center ShaftSplitter Gearbox Assembly Figure Splitter Gearbox InstallationSplitter Gearbox Inspection Side ShaftCrossbar Removal Crossbar RemovalCrossbar Installation Joint DisassemblyUniversal Joint Repair Joint Assembly Service Tires SafelyAssembly Assembly InstructionsCenter Section Assembly Install Hydraulic Hoses FigureInstall Attitude Rods Figure Install Height Adjustment CylinderInstall SMV Emblem Figure Install Spring Wheel Arms FigureInstall Tongue Figure Install 3-Joint Drive FigureInstall Optional CV Drive Figure CV Drive InstallationWing Assembly Install WingInstall Wing Cylinder and Transport Lock Install Wing Wheel Yoke Figure Install Wing Wheel Yoke Adjustment LinkFill Gearboxes Hydraulic CylinderOptional Equipment Tandem Wheel Assembly Installation Center Section Right WingInstall Chain or Belt Shielding Chain Shielding Installation Center SectionLink Winch Kit Installation Optional Roller Assembly InstallationShredder Installation Optional Crossbar Installation Right WingCrossbar Installation Left Wing Crossbar Installation Center SectionBW1620X Counterweight Installation BW1620X Counterweight Installation Dealer Check Lists Dealer Check ListsPRE-DELIVERY Check List Delivery Check ListParts Index PartsMain Frame Assembly Front Section Part Main Frame Assembly Rear Section 1027070 Center wheel yoke 57050 Access hole cover 10475 Right Wing Shown Part QTY Description Wing & Center Gearbox Assembly 540 RPM 1000 RPM Wing CenterSplitter Gearbox Assembly 540 RPMCenter Deck Drive Assembly Front 3-JOINT Drive Assembly Equal Angle 40728 Inner shieldRear 3-JOINT Drive Assembly Equal Angle Type a 540 RPM Front CV Drive Type B 540 RPM Front CV Drive Type a 1000 RPM Front CV Drive RPM 1-3/8 21-Splined RPM 1-3/4 20-SplinedType B 1000 RPM Front CV Drive Wing Drive Assembly REF Part QTY DescriptionBolt Wheel & Tire Assembly Rubber Shielding Center Section Standard on BW2400 Models Rubber Shielding Wing Standard on BW2400 Models Chain Shielding Center Section Single ROW Double ROWChain Shielding Wing Tandem Axle Wheel Yoke Optional Parts Hydraulic CylindersHydraulic Cylinder Stroke Control KIT Crossbar Puller OptionalShredder KIT Optional BW1620X / BW1620XQ / BW1620XQREV Counterweight BOX Assembly Winch KIT Optional Winch Kit OperationBolt Torque Chart SAE Series Torque ChartAppendix Metric SeriesBolt Size Chart AbbreviationsIndex IndexWarranty South Illinois Route Post Office Box Oregon, Illinois

BW2400X, BW1620XQREV, BW2400XQ, BW1620X, BW1620XQ specifications

Woods Equipment has established itself as a trusted name in the landscape and agricultural equipment sector, offering a wide range of high-performance products tailored to meet various needs. Among its standout offerings are the BW1620XQ, BW1620X, BW2400XQ, BW1620XQREV, and BW2400X models, known for their robust design and exceptional functionality.

The BW1620XQ is designed for efficient brush cutting, making it an ideal choice for land maintenance and clearing dense underbrush. One of its main features is the heavy-duty construction, which ensures durability even under the toughest conditions. This model is equipped with a reinforced deck, providing added strength and longevity. It also features a powerful PTO-driven cutting system, allowing it to tackle tough growth with ease.

The BW1620X model offers similar capabilities to the BW1620XQ but is optimized for lighter tasks and smaller properties. It shines in residential applications, where maneuverability and ease of use are paramount. This model is lightweight and easy to attach, making it a favorite among homeowners who require a reliable tool for maintaining their yards and gardens.

For those requiring larger-scale solutions, the BW2400XQ provides increased cutting width and efficiency. This model excels in farm and large property applications, where speed and power are essential. Featuring advanced blade technology, the BW2400XQ offers superior cutting performance and reduced maintenance needs. Additionally, it boasts adjustable height settings, allowing users to customize their cutting experience based on the terrain and type of vegetation.

The BW1620XQREV is a revolutionary model that incorporates newer technology for even better performance and user experience. This model offers enhanced features such as improved blade design for finer cuts and an innovative quick-attach system that enables fast connectivity and disconnection from tractors.

Finally, the BW2400X model is the standard version of the BW2400XQ, providing similar power and efficiency without some of the specialized features, making it a cost-effective solution for users who need reliable equipment without as many bells and whistles.

In conclusion, Woods Equipment's BW1620XQ, BW1620X, BW2400XQ, BW1620XQREV, and BW2400X models each feature unique characteristics tailored to specific applications, ensuring users can find the right tool for their needs, whether for residential landscaping or large-scale agricultural tasks. Their emphasis on durability, efficiency, and user-friendly design makes them a preferred choice across various sectors.