BW1620X Counterweight Installation

Figure 44. Shredder Kit Installation

1.Attach mounting bracket (6) to the front side of the front baffle and secure with cap screws (12), hardened flat washers (14) and lock nuts (13). Do not tighten hardware.

2.Attach stationary blade (5) to mounting bracket (6) using two cap screws (10), four hardened flat washers 915) and lock nuts (11). Blade should be angled by using the first hole on the left side and the second hole on the right side. Refer to Figure 43.

3.Rotate crossbar and blades so stationary blade fits between the two crossbar blades. Adjust mounting bracket (6) so the stationary blade (5) is 1" below flat blade (4), Tighten all hardware. See Figure 43.

NOTE: Stationary blade should be parallel to the rotating blades, point toward the center of the gear- box and rear of cutter, and overlap rotating blades approximately 4 inches.

4.Repeat steps to install stationary mounting bracket

(6) and blade (5) to the opposite wing.

(Figure 45)

The offset model is unstable without adequate counterweight. Use counterweight box loaded with 1300 lbs (591 kg) of steel.

■Use a suitable lifting device of sufficient capac- ity. Use adequate personnel to handle heavy com- ponenets.

This unit may be operated with only one wing - either right or left. With only one wing, the unit is unshielded and unstable. When electing to operate with one wing, you must install a counterweight box, available from your dealer. This box has a dual purpose: it substitutes for the shielding and for the weight of the removed wing.

The counterweight must be installed in the following sequence and will require at least two people. A floor jack or a suitable lifting device will be helpful to align the hinges when installing the hinge pin.

1.Remove hinge pin (2) from center section.

2.Align skid shoe (3) with holes on bottom and inside of weight box (6). Secure bottom with the hardware provided with skid shoe.

3.Place weight box assembly adjacent to the center section and align hinge sections.

4.Insert hinge pin through the hinge sections. Secure hinge pin with two washers (10) and two spring pins (9).

46Assembly

(Rev. 2/6/2009)

MAN0764 (11/5/2008)

BW2400X, BW1620XQREV, BW2400XQ, BW1620X, BW1620XQ specifications

Woods Equipment has established itself as a trusted name in the landscape and agricultural equipment sector, offering a wide range of high-performance products tailored to meet various needs. Among its standout offerings are the BW1620XQ, BW1620X, BW2400XQ, BW1620XQREV, and BW2400X models, known for their robust design and exceptional functionality.

The BW1620XQ is designed for efficient brush cutting, making it an ideal choice for land maintenance and clearing dense underbrush. One of its main features is the heavy-duty construction, which ensures durability even under the toughest conditions. This model is equipped with a reinforced deck, providing added strength and longevity. It also features a powerful PTO-driven cutting system, allowing it to tackle tough growth with ease.

The BW1620X model offers similar capabilities to the BW1620XQ but is optimized for lighter tasks and smaller properties. It shines in residential applications, where maneuverability and ease of use are paramount. This model is lightweight and easy to attach, making it a favorite among homeowners who require a reliable tool for maintaining their yards and gardens.

For those requiring larger-scale solutions, the BW2400XQ provides increased cutting width and efficiency. This model excels in farm and large property applications, where speed and power are essential. Featuring advanced blade technology, the BW2400XQ offers superior cutting performance and reduced maintenance needs. Additionally, it boasts adjustable height settings, allowing users to customize their cutting experience based on the terrain and type of vegetation.

The BW1620XQREV is a revolutionary model that incorporates newer technology for even better performance and user experience. This model offers enhanced features such as improved blade design for finer cuts and an innovative quick-attach system that enables fast connectivity and disconnection from tractors.

Finally, the BW2400X model is the standard version of the BW2400XQ, providing similar power and efficiency without some of the specialized features, making it a cost-effective solution for users who need reliable equipment without as many bells and whistles.

In conclusion, Woods Equipment's BW1620XQ, BW1620X, BW2400XQ, BW1620XQREV, and BW2400X models each feature unique characteristics tailored to specific applications, ensuring users can find the right tool for their needs, whether for residential landscaping or large-scale agricultural tasks. Their emphasis on durability, efficiency, and user-friendly design makes them a preferred choice across various sectors.