Install Wing Wheel Yoke Figure | Woods Equipment BW1620X, BW2400XQ

8.Insert hose (25) through hose guide on transport lock bracket and secure to elbow.

9.Repeat procedure for opposite wing.

Install Wing Wheel Yoke (Figure 32)

1.Place carriage bolts (67) through holes in wing. Carriage bolts are on the outside; lock nuts on the underside.

2.Attach wing wheel yoke (6) to the wing using pivot pins (31). Make sure pin flange is on the underside of the deck. See Figure 32.

3.Secure pivot pins to deck using carriage bolts (67) and flange lock nuts (53).

4.Insert wheel hub (17) into wing wheel yoke arm (6) and align holes.

5.Secure into position using cap screw (30) and flanged lock nut (53).

6.Attach wheel to hub using five lug nuts. Install the chamfered side of the lug nut toward the inside for steel rim for pneumatic tires and rims. Tighten to 75 lbs-ft. Set tire pressure to a maximum of 40 psi.

NOTE: Install the flat side of the nut toward the inside for solid tires and aircraft tires (shown).

7.Install optional dual wheel and hub to inside of wheel yoke arm.

Install Wing Wheel Yoke Adjustment Link

(Figure 31)

CAUTION

Use a suitable lifting device of sufficient capac- ity. Use adequate personnel to handle heavy com- ponents.

1.With a lifting device raise right wing and lock in the up position using the wing lock-up bar. Leave lifting device attached for added support.

2.Attach adjustable link (turnbuckle, 22) to right side of center wheel yoke arm and secure with cap screw (32) and lock nut (26).

3.Attach opposite end of adjustable link (22) to wing wheel yoke arm and secure with cap screw (32) and lock nut (26).

4.Remove lock-up bar and carefully lower wing using lifting device.

5.Repeat process for left wing.

6.See Cutting Height (Normal Mowing) - Wings, page 16 to level wings.

		32
		22
	26
	22.	Adjustable link
	26.	1 NC Lock nut
DP6	32.	1 NC x 4 Hex head cap screw GR8

Figure 31. Right Wing Wheel Yoke;

Adjustment Link Installed

6.Wing wheel yoke arm, right

17.Wheel and hub

30.1/2 NC x 3 Hex head cap screw GR5

31.Pivot pin, 1-1/4

53.1/2 NC Flanged lock nut

67.1/2 NC x 1-1/2 Carriage bolt

Figure 32. Wing Wheel and Hub Installation - Right

MAN0764 (11/5/2008)	Assembly 39

BW2400X, BW1620XQREV, BW2400XQ, BW1620X, BW1620XQ specifications

Woods Equipment has established itself as a trusted name in the landscape and agricultural equipment sector, offering a wide range of high-performance products tailored to meet various needs. Among its standout offerings are the BW1620XQ, BW1620X, BW2400XQ, BW1620XQREV, and BW2400X models, known for their robust design and exceptional functionality.

The BW1620XQ is designed for efficient brush cutting, making it an ideal choice for land maintenance and clearing dense underbrush. One of its main features is the heavy-duty construction, which ensures durability even under the toughest conditions. This model is equipped with a reinforced deck, providing added strength and longevity. It also features a powerful PTO-driven cutting system, allowing it to tackle tough growth with ease.

The BW1620X model offers similar capabilities to the BW1620XQ but is optimized for lighter tasks and smaller properties. It shines in residential applications, where maneuverability and ease of use are paramount. This model is lightweight and easy to attach, making it a favorite among homeowners who require a reliable tool for maintaining their yards and gardens.

For those requiring larger-scale solutions, the BW2400XQ provides increased cutting width and efficiency. This model excels in farm and large property applications, where speed and power are essential. Featuring advanced blade technology, the BW2400XQ offers superior cutting performance and reduced maintenance needs. Additionally, it boasts adjustable height settings, allowing users to customize their cutting experience based on the terrain and type of vegetation.

The BW1620XQREV is a revolutionary model that incorporates newer technology for even better performance and user experience. This model offers enhanced features such as improved blade design for finer cuts and an innovative quick-attach system that enables fast connectivity and disconnection from tractors.

Finally, the BW2400X model is the standard version of the BW2400XQ, providing similar power and efficiency without some of the specialized features, making it a cost-effective solution for users who need reliable equipment without as many bells and whistles.

In conclusion, Woods Equipment's BW1620XQ, BW1620X, BW2400XQ, BW1620XQREV, and BW2400X models each feature unique characteristics tailored to specific applications, ensuring users can find the right tool for their needs, whether for residential landscaping or large-scale agricultural tasks. Their emphasis on durability, efficiency, and user-friendly design makes them a preferred choice across various sectors.