Woods Equipment BW2400XQ, BW1620XQ manual Install Tongue Figure, Install 3-Joint Drive Figure

Page 36

4.Pivot pin, 1-1/4

5.Pivot pin, 1

6.Attitude rod

24.Spacer

23.Retainer

25.Clevis

26.Tongue level link

27.Tongue level bracket

28.Tongue

29.Parking jack (not shown)

31. Hose holder

45.5/8 NC x 4-1/2 Hex head cap screw GR5

50.1/2 NC Flange lock nut

53.1/2 NC x 1-1/4 Hex head cap screw GR5

62.5/8 NC Lock nut

73.1" NC Hex nut

75.1/2 NC x 1-1/2 Carriage bolt

83.Spacer, 1" x 1"

Figure 26. Tongue Installation

Install Tongue (Figure 26)

NOTE: Route center and wing cylinder hoses before proceeding. See Install Hydraulic Hoses, page 33, for hose routing instructions.

NOTE: Use a suitable lifting device of sufficient capac- ity. Use adequate personnel to handle heavy compo- nents.

1.Attach tongue (28) to the center section using two 1-1/4 pivot pins (4), carriage screws (75), and hex nuts (50).

2.Thread hex nut (73) onto tongue level link (26). Raise tongue and insert level link through center pivot casting.

3.Attach each attitude rod (6) between the lugs on tongue and secure with spacer (83), clevis pin (5), carriage screw (75), and lock nut (50).

4.Attach parking jack (29) to the side of the tongue.

5.Attach second hex nut (73) to tongue level link (26) on the back side of center pivot casting.

6.Attach hose holder (31) to the top of the tongue using two cap screws (53) and lock nuts (50).

Install 3-Joint Drive (Figure 27)

Before installing cutter input driveline to gearbox, check the tag wired to the driveline and the tag wired to the input shaft of gearbox. Ensure the tag rpm speeds match the rpm speed decal on front of cutter. After con- firming all speeds match, remove and discard tags and then complete driveline assembly.

1.Attach H-frame (30) to tongue with two bolts (77), sleeves (47), cup washers (60), and nuts (62).

2.Coat splined end of gearbox input shaft with grease.

3.Slide drive (33) onto shaft and align hole in drive yoke with groove on gearbox input shaft.

4.Secure with bolt and nut supplied with drive.

5.Secure driveline carrier bearing to H-frame with pin (69) and cotter pin (70).

36 Assembly

MAN0764 (11/5/2008)

 

 

Page 35 Page 37
Image 36
Page 35 Page 37
Contents MAN0764 Introduction To the DealerTable of Contents Specifications General InformationBW1620X, BW1620XQ BW2400X, BW2400XQFree Mower Safety Video SafetyTraining Package for Rotary Mowers/Cutters-English Training Package for Rotary Mowers/Cutters-English/SpanishSafety Rules InstallationTraining PreparationTransportation OperationMaintenance Storage Safety & Instructional Decals Be CarefulPN 1006348 located on split rim wheels Safety Safety Connecting Cutter to Tractor OperationOperation Cutting Height Adjustment Hydraulic ConnectionInterference Check CV Driveline Turning LimitsAttitude Rod Adjustment Figure Tractor OperationCutter Operation Cutting Height Normal Mowing WingsMowing Tips TransportingShredding Lock-UpPRE-OPERATION Check List Wing Lock-Up FigureCenter Section Lock-Up Figure Owner Service Owner ServiceBlocking Method Lubrication Gearbox LubricationDriveline Lubrication Description FrequencyBlade Installation Figure Seasonal LubricationBlades Blade Removal FigureSlip Clutch Adjustment Figure Blade Sharpening FigureRepairing Rubber Shielding Repairing Optional Chain ShieldingCleaning Shielding RepairTroubleshooting TroubleshootingDealer Service Dealer ServiceSeal Replacement Figure Vertical Shaft Seal Replacement FigureWing & Center Gearbox Repair Gearbox Wing & Center Gearbox Installation Figure Splitter Gearbox Disassembly FigureSplitter Gearbox Repair Figure Splitter Gearbox Removal Center ShaftSplitter Gearbox Assembly Figure Splitter Gearbox InstallationSplitter Gearbox Inspection Side ShaftCrossbar Removal Crossbar RemovalCrossbar Installation Joint DisassemblyUniversal Joint Repair Joint Assembly Service Tires SafelyAssembly Assembly InstructionsCenter Section Assembly Install Hydraulic Hoses FigureInstall Attitude Rods Figure Install Height Adjustment CylinderInstall SMV Emblem Figure Install Spring Wheel Arms FigureInstall Tongue Figure Install 3-Joint Drive FigureInstall Optional CV Drive Figure CV Drive InstallationWing Assembly Install WingInstall Wing Cylinder and Transport Lock Install Wing Wheel Yoke Figure Install Wing Wheel Yoke Adjustment LinkFill Gearboxes Hydraulic CylinderOptional Equipment Tandem Wheel Assembly Installation Center Section Right WingInstall Chain or Belt Shielding Chain Shielding Installation Center SectionLink Winch Kit Installation Optional Roller Assembly InstallationShredder Installation Optional Crossbar Installation Right WingCrossbar Installation Left Wing Crossbar Installation Center SectionBW1620X Counterweight Installation BW1620X Counterweight Installation Dealer Check Lists Dealer Check ListsPRE-DELIVERY Check List Delivery Check ListParts Index PartsMain Frame Assembly Front Section Part Main Frame Assembly Rear Section 1027070 Center wheel yoke 57050 Access hole cover 10475 Right Wing Shown Part QTY Description Wing & Center Gearbox Assembly 540 RPM 1000 RPM Wing CenterSplitter Gearbox Assembly 540 RPMCenter Deck Drive Assembly Front 3-JOINT Drive Assembly Equal Angle 40728 Inner shieldRear 3-JOINT Drive Assembly Equal Angle Type a 540 RPM Front CV Drive Type B 540 RPM Front CV Drive Type a 1000 RPM Front CV Drive RPM 1-3/8 21-Splined RPM 1-3/4 20-SplinedType B 1000 RPM Front CV Drive Wing Drive Assembly REF Part QTY DescriptionBolt Wheel & Tire Assembly Rubber Shielding Center Section Standard on BW2400 Models Rubber Shielding Wing Standard on BW2400 Models Chain Shielding Center Section Single ROW Double ROWChain Shielding Wing Tandem Axle Wheel Yoke Optional Parts Hydraulic CylindersHydraulic Cylinder Stroke Control KIT Crossbar Puller OptionalShredder KIT Optional BW1620X / BW1620XQ / BW1620XQREV Counterweight BOX Assembly Winch KIT Optional Winch Kit OperationBolt Torque Chart SAE Series Torque ChartAppendix Metric SeriesBolt Size Chart AbbreviationsIndex IndexWarranty South Illinois Route Post Office Box Oregon, Illinois

BW2400X, BW1620XQREV, BW2400XQ, BW1620X, BW1620XQ specifications

Woods Equipment has established itself as a trusted name in the landscape and agricultural equipment sector, offering a wide range of high-performance products tailored to meet various needs. Among its standout offerings are the BW1620XQ, BW1620X, BW2400XQ, BW1620XQREV, and BW2400X models, known for their robust design and exceptional functionality.

The BW1620XQ is designed for efficient brush cutting, making it an ideal choice for land maintenance and clearing dense underbrush. One of its main features is the heavy-duty construction, which ensures durability even under the toughest conditions. This model is equipped with a reinforced deck, providing added strength and longevity. It also features a powerful PTO-driven cutting system, allowing it to tackle tough growth with ease.

The BW1620X model offers similar capabilities to the BW1620XQ but is optimized for lighter tasks and smaller properties. It shines in residential applications, where maneuverability and ease of use are paramount. This model is lightweight and easy to attach, making it a favorite among homeowners who require a reliable tool for maintaining their yards and gardens.

For those requiring larger-scale solutions, the BW2400XQ provides increased cutting width and efficiency. This model excels in farm and large property applications, where speed and power are essential. Featuring advanced blade technology, the BW2400XQ offers superior cutting performance and reduced maintenance needs. Additionally, it boasts adjustable height settings, allowing users to customize their cutting experience based on the terrain and type of vegetation.

The BW1620XQREV is a revolutionary model that incorporates newer technology for even better performance and user experience. This model offers enhanced features such as improved blade design for finer cuts and an innovative quick-attach system that enables fast connectivity and disconnection from tractors.

Finally, the BW2400X model is the standard version of the BW2400XQ, providing similar power and efficiency without some of the specialized features, making it a cost-effective solution for users who need reliable equipment without as many bells and whistles.

In conclusion, Woods Equipment's BW1620XQ, BW1620X, BW2400XQ, BW1620XQREV, and BW2400X models each feature unique characteristics tailored to specific applications, ensuring users can find the right tool for their needs, whether for residential landscaping or large-scale agricultural tasks. Their emphasis on durability, efficiency, and user-friendly design makes them a preferred choice across various sectors.
Top Page Image Contents