OPERATION
Before Starting
•Read the sections "Safety Instructions" and "Controls" before starting the machine.
•Perform the daily maintenance before starting (see "Maintenance Schedule" in the "Maintenance" section).
•Check that there is sufficient fuel in the fuel tank.
•Adjust the seat to the desired position.
•Make sure all guards are in place and in good condition.
The following conditions must be fulfilled before the engine can be started:
•the driver must be seated on the seat,
•the blade switch for engaging the mower blades must be depressed,
•the parking brake must be on,
•both steering controls must be in the locked (outer) neutral position.
•Use the personal safety equipment described in the safety instructions.
Starting the Engine
1.Sit on the seat.
2.Raise the mower deck by depressing the pedal forward to the locked position (transport position). The mower deck will latch in the transport position when the lift pedal is fully depressed.
3.Activate the parking brake.
Start conditions
Raise the mower deck