Multiquip operation manual DCA-70USI 50 Hz Output Terminal Panel Connections

DCA-70USI (50 Hz) — OUTPUT TERMINAL PANEL CONNECTIONS

3Ø 440/254 Output Terminal Lug Voltages

1.Place the voltage selector switch in the 3Ø 480/277 position as shown in Figure 27.

1Ø 200V/100V Output Terminal Lug Voltages

1.Place the voltage selector switch in the 1Ø 240/120 position as shown in Figure 29.

Figure 27. Voltage Selector Switch 480/277V

Three-Phase PositionFigure 29. Voltage Selector Switch 240/120V Single-Phase Position

2.Connect the load wires to the OutputTerminal Lugs as shown in Figure 28.

2.Connect the load wires to the OutputTerminal Lugs as shown in Figure 30.

Figure 28. Output Terminal Lugs	Figure 30. Output Terminal Lugs
1Ø-440/254V Connections	1Ø-200/100V Connections

3.Turn the voltage regulator knob (Figure 24) clockwise to increase voltage output, turn counterclockwise to decrease voltage output.

3.Turn the voltage regulator knob (Figure 25) clockwise to increase voltage output, turn counterclockwise to decrease voltage output.

DCA-70USI (50 Hz) — OPERATION AND PARTS MANUAL — REV. #1 (04/22/05) — PAGE 31