Startup, Starting Manual | Multiquip SG1400C3-55748 manual

startup

6.If unit is to be used in parallel with another unit, interconnect the units. Interconnect the output buses with suitable power cables to carry full load capacity. Special male-to-male Camlok cables will be needed. For 480 V mode, it is recommended that one 4/0 cable per phase, neutral and ground be used. For 208V mode, use two 4/0 cables per phase and neutral and one 4/0 cable for ground. Also connect the parallel communication cables.

7.Connect the load to the receptacles on the Camlok/ Voltage Output Panel. When the camloks are inserted into the outlet connector, rotate clockwise until they are locked in place. Make sure the camloks are connected securely.

8.Press the MODE button (Figure 25) on the Digital Controller Display and select manual mode (MAN) with the arrow keys. Press Enter key when MAN is highlighted on the screen.

MAN

PRESS MODE BUTTON

Figure 25. Mode Button (Manual)

Starting (Manual)

1.Press the START button (Figure 26) on the controller to start the engine.

Figure 26. START Button

2.The engine will go to idle mode.

3.Listen for any abnormal noises. If any abnormalities exist, shut down the engine and correct the problem.

4.To bypass idle mode, press the START button again. The generator should go to full speed.

NOTICE

If START button is not pressed again, the engine will remain in idle mode for about an hour then will go to full speed.

5.Verify that the no-load frequency reading on the control panel frequency display is approximately 60 Hz (1800 rpm).

6.Verify that the voltage reading on the control panel AC voltmeter display matches the voltage selector switch position that was selected prior to startup.

7.Press the GCB control button on the controller (Figure 27) to close circuit breaker.

Close GCB

PRESS GCB CONTROL BUTTON

Figure 27. Generator Circuit Breaker (Closed)

8.Verify that the BUS HOT light on the Camlok/Voltage Output Panel is on. Voltage is now available at the receptacles.

BUS HOT

LIGHT

Figure 28. Bus Hot Light

SG1400c3 studio generator • operation and parts manual — rev. #1 (02/15/12) — page 35

SG1400C3-55748 specifications

The Multiquip SG1400C3-55748 is an advanced generator designed for a wide array of applications, including construction sites, event management, and emergency power backup. At the heart of this robust unit lies a powerful engine that produces reliable energy output, ensuring that it meets the demands of both professionals and casual users alike.

The SG1400C3-55748 boasts an impressive power rating of 14 kW, making it suitable for powering multiple tools and equipment simultaneously. This generator is equipped with a durable and fuel-efficient engine, capable of running for extended periods without compromising performance. Efficient fuel consumption is a critical feature, allowing users to maximize productivity while minimizing operational costs.

One of the standout features of the SG1400C3-55748 is its advanced sound attenuation system. This generator is designed with a noise-reduced enclosure that significantly lowers operational sound levels, making it an excellent choice for noise-sensitive environments. This feature not only enhances user comfort but also complies with noise regulations that may be in effect at various job sites.

The Multiquip SG1400C3-55748 incorporates advanced technologies, including automatic voltage regulation (AVR), which offers stable power output and protects connected devices from voltage fluctuations. This is particularly beneficial for sensitive electronics and equipment that could be damaged by irregular power supply. The generator also features an easy-to-read control panel that allows users to monitor output levels and operating conditions effortlessly.

Safety is a priority for the SG1400C3-55748, featuring multiple safety mechanisms such as low oil shutdown and over-temperature protection. These features ensure that the generator operates within safe parameters, reducing the risk of damage to the unit and connected loads.

The portability of the Multiquip SG1400C3-55748 is enhanced by its compact design and integrated wheel kit, allowing easy transportation between job sites. Whether for emergency use, outdoor events, or construction, this generator offers the versatility and reliability needed for various applications.

In summary, the Multiquip SG1400C3-55748 is a powerful, efficient, and portable generator. Its advanced technologies, user-friendly features, and safety mechanisms make it an ideal choice for professionals and homeowners alike, ensuring that you have the reliable power you need when you need it most.