Undermount Installation English, Cleanup | Jacuzzi HE97000 instruction

Comfort Whirlpool Bath

Undermount Installation

English

1Install drain/overflow according to the manufacturer’s instructions.

Watertight installation of the drain is the installer’s responsibility. Drain leakage is excluded from the Jacuzzi Luxury Bath warranty of this product.

2Turn off power supply to dedicated GFCI protected circuits.

3Install the unit in desired location. DO NOT use plumbing fixtures or lines to carry or lower the unit.

4Inspect all fittings, plumbing, and control lines after inserting to insure the components are not damaged or disconnected.

5Align the bathtub and connect the drain.

6Insulation may be placed within the bathtub surround.

Provide adequate ventilation around the motor/pump to ensure sufficient air flow and cooling.

7Cut deck/counter to fit using the undermount template provided as follows:

•Position the template so that the desired undermount guidelines are aligned with the rim edge as shown.

•Using a grease pencil, mark the center lines (denoted by on template). Remove template.

•Measure the distance from the wall, or other fixed point, to the center lines.

8Affix counter to bathtub. Clean any dirt or debris from the top of the bathtub rim. Apply a bead of silicone sealant around the entire rim of bathtub.

Do not use an adhesive or adhesive sealant to secure the counter to the bathtub. If maintenance or remodeling is required, the counter may have to be removed. Adhesive will permanently bond the counter to the bathtub. Carefully position the deck/counter over the bathtub. Follow manufacturer’s instructions to determine cure time.

9Apply a continuous bead of silicone sealant around the entire seam between the counter and the bathtub rim. Allow sealant to cure according to manufacturer’s instructions.

10Turn on the power supply to the dedicated GFCI protected circuits and check system operation.

Template

Bathtub Rim

Figure 16 - Template Placement

A B

Counter

Template

Figure 17 - Distance Measurement

Cleanup

To avoid dulling and scratching the surface of the bathtub, never use abrasive cleaners. For most soiled surfaces, a mild liquid detergent and warm water is sufficient. The following is also recommended:

•Remove spilled plaster with a wood or plastic edge. Spots left by plaster or grout can be removed if lightly rubbed with detergent on a damp cloth or sponge. Do not use metal scrapers, wire brushes or other metal tools, as they will damage the bathtub’s surface.

•Paint, tar, or other difficult stains can be removed with Fantastik® or soapy water.

•Minor scratches which do not penetrate the color finish can be removed by lightly sanding with 600-grit wet/dry sandpaper. You can restore the glossy finish to the acrylic surface of the bathtub with a special compound, Meguiar’s #10 Mirror Glaze. If that is not available, use automotive rubbing compound followed by an application of automotive paste wax.

•Major scratches and gouges which penetrate the acrylic surface will require refinishing. Call Jacuzzi Luxury Bath to find a service agent in your area.

Page 16

www.jacuzzi.com

Installation and Operation

HE97000 specifications

The Jacuzzi HE97000 is a state-of-the-art hot tub that redefines the standards of luxury and relaxation. Designed with advanced technology and attention to detail, this model offers users an unparalleled experience in comfort and wellness.

One of the standout features of the HE97000 is its spacious seating capacity, accommodating up to seven adults. This makes it ideal for entertaining guests or enjoying a peaceful evening with family. Each seat is ergonomically designed to provide optimal support and relaxation, with strategically placed jets that target key muscle groups for a rejuvenating massage experience.

The HE97000 is equipped with an advanced hydrotherapy system featuring therapeutic jets that can be customized to create various massage patterns. Users can adjust the intensity and direction of the jets, allowing them to tailor their experience to suit specific needs, whether it be tension relief or relaxation. Additionally, the hot tub features a unique waterfall feature, providing a soothing sound and visual element that enhances the overall experience.

In terms of technology, the Jacuzzi HE97000 incorporates a user-friendly digital control panel that allows for easy management of temperature, jet settings, and lighting. This intuitive interface ensures that users can easily customize their settings with minimal effort. The hot tub is also equipped with LED lighting options, which can be adjusted to create a tranquil ambiance that complements the relaxation experience.

Energy efficiency is another crucial characteristic of the HE97000. The unit is designed with a robust insulation system, reducing energy consumption while maintaining optimal water temperatures. This not only helps users save on energy costs but also contributes to environmentally friendly use.

Durability is key in Jacuzzi's design philosophy, and the HE97000 is no exception. Crafted from high-quality materials, the hot tub is built to withstand the elements, ensuring long-lasting performance. The exterior features a stylish cabinet that can be customized to match any outdoor setting, while the interior is made from easy-to-clean surfaces that enhance hygiene.

In summary, the Jacuzzi HE97000 combines luxurious features, advanced technology, and durable construction to provide an exceptional hot tub experience. From its spacious seating and customizable hydrotherapy options to its energy-efficient design and sleek aesthetics, this model caters to all your relaxation needs. Whether used for therapeutic benefits or social gatherings, the HE97000 is a perfect investment for enhancing well-being and enjoyment in the comfort of your home.