Guardian Technologies 004708-0, 004700-0 owner manual Installation Checklist

Page 36

Section 3 – Post-Installation Start-up Adjustments

Recreational Vehicle Generator

3.5 INSTALLATION CHECKLIST

‹EXHAUST SYSTEM

‹ LOCATION AND SUPPORT

Exhaust system complies with all applicable

codes.

Generator is properly located.

Exhaust system is properly and safely installed.

Generator is properly supported.

Generator is properly restrained.

‹GENERATOR COMPARTMENT

Compartment construction is proper.

Holes/Openings are vapor-sealed.

Compartment size is correct.

Compartment is vapor-sealed.

Sound insulation is correct.

Floor cutouts are properly completed.

‹COOLING AND VENTILATING AIR

Airflow is adequate.

Air inlet opening is correct.

Compensate for restrictions.

Check that installation has been tested.

‹GASOLINE FUEL SYSTEM

Fuel tank complies with all applicable codes.

Fuel system is properly installed and checked for leaks.

‹OPTIONAL LP GAS FUEL SYSTEM

Fuel system is properly installed and checked for leaks.

Pressure at regulator inlet is correct.

Rated flow of primary regulator is correct.

All parts are properly installed.

Fuel system is properly tested/adjusted.

‹ELECTRICAL CONNECTIONS

Connections comply with local code requirements and all National Electrical Codes.

Junction box is properly installed.

Wiring meets all standards.

All connections are correct.

Conduit is properly installed and sealed.

Generator is properly bonded to the vehicle.

‹BATTERY INSTALLATION

Recommended battery is installed.

Recommended cables are installed.

Cables are clean and tight.

Cables are connected properly.

Proper ventilation is provided.

Terminals are coated with anti-corrosion grease, and terminal covers are positioned.

‹OPTIONAL ACCESSORIES

Check that remote start/stop panels (if used) are installed properly.

Check that hourmeter kit (if used) is installed properly.

Check that any other options and accessories (if used) are installed properly.

‹POST INSTALLATION TESTS

Check that all tests are completed properly.

DATE OF INSTALLATION ____________________________________________________

NAME OF INSTALLER_______________________________________________________

SIGNATURE OF INSTALLER _________________________________________________

34

Image 36
Contents Air-cooled Recreational Vehicle Generators Authorized Service Dealer Location IntroductionPart II Installation Instructions Part Warning   Fire Hazards  Generator Identification Model Number Serial Number KW Rating Rated VoltageSafety SpecificationsGenerator Applicability ‹ 1.5.1 Fuel Requirements‹ 1.5.5 Generator Fuel ConsumptionEngine OIL Requirements ‹ 1.5.6 Emissions Compliance PeriodGenerator Control Panel Automatic ChokeBefore Starting the Engine Starting the Generator ‹ 2.4.2 Engine Lubrication‹ 2.4.3 Fuel Supply ‹ 2.4.4 Cooling and Ventilating AIRStopping the Generator Applying Loads to GeneratorDo not Overload the Generator Protection Systems Additional Information ‹ 2.9.3 Field Boost‹ 2.10.2 Operation in High Grass or Brush ‹ 2.9.4 Overvoltage ProtectionChecking the Engine OIL Level Changing the Engine OIL AND/OR OIL FilterMaintaining the Engine AIR Cleaner Clean AIR Intake‹ 3.3.1 Cleaning the Foam Precleaner Clean Spark Arrestor Cleaning the GeneratorFuel Filter Battery Maintenance OUT of Service Procedure‹ 3.12.1 Removal from Service Exercising the GeneratorAdjusting Valve Clearance RV Generator Service Interval‹ 3.12.2 Return to Service Recreational Vehicle Generator Part  General Hazards   Fire Hazards  Purpose and Scope Manual Equipment DescriptionStandards Booklets Major Features and Dimensions Drawing No D8716-H Location and Support ‹ 2.1.1 Generator Location‹ 2.1.2 Generator Support Generator Compartments ‹ 2.1.4 Generator Restraint‹ 2.2.2 Compartment Construction ‹ 2.2.1 Compartment Size‹ 2.2.4 Acoustics ‹ 2.2.3 Sound Insulating Materials‹ 2.2.5 Compartment Floor Cutouts ‹ 2.3.1 Generator AirflowCompartment Floor Cutout Drawing 0G3723-A ‹ 2.3.2 Testing the Installation Gasoline Fuel System‹ 2.4.1 Fuel Tank ‹ 2.4.2 Generator Fuel Supply LineExhaust System Flexible Fuel Line‹ 2.5.1 Spark Arrestor ‹ 2.5.2 Exhaust System Safety Electrical Connections‹ 2.6.5 Isolating Different Power Sources ‹ 2.6.6 Power Supply Cord‹ 2.6.4 Conduit Battery Installation ‹ 2.7.1 Recommended Battery‹ 2.7.2 Battery Cables Optional Accessories ‹ 2.7.4 Battery Compartment‹ 2.8.1 Remote START/STOP Panel Post Installation Tests Testing Under LoadBefore Initial START-UP Initial StartInstallation Checklist Troubleshooting Guide Problem Cause CorrectionElectrical Data Customer Supplied by Recreational Vehicle Generator Enclosure Drawing No D8352-M QTY Description Recreational Vehicle Generator Generator Drawing No D8353-M FAN, 8 Curve BLADE, 16.5MM I.D Exploded Views and Parts Lists QTY Exploded Views and Parts Lists GUARD, FAN Exploded Views and Parts Lists Long Block Assembly Your Warranty Rights and Obligations MANUFACTURER’S Emission Control System Warranty CoveragePURCHASER’S/OWNER’S Warranty Responsibilities Emission Control System Warranty Emission Related Parts Include the FollowingWarranty Schedule CONSUMER/PERSONAL Applications