Guardian Technologies 004701-0 Optional Accessories,  2.7.3 Battery Cable Connections

Page 32

Section 2 – Installation

Recreational Vehicle Generator

2.7.3 BATTERY CABLE CONNECTIONS

1.Connect the battery cable from the battery post or terminal indicated by a POSITIVE, POS or (+) to the lug on the starter contactor (Figure 2.16).

NOTE:

Check to be sure the battery cable boot for the starter cable has been installed.

2.Connect the battery cable from the battery post indicated by a NEGATIVE, NEG or (-) to the frame ground connection (Figure 2.16).

3.Connect cables so the connectors are clean and tight.

Figure 2.16 – Connecting Battery Cables

71.2 [2 13/16"]

POS. BAT.

34.3CONNECTION [1 3/8"]

NEG. BAT.

CONNECTION

39.6

69.6

[1 9/16"]

[2 3/4"]

2.7.4 BATTERY COMPARTMENT

Install the generator battery in its own, vented com- partment. Place the battery compartment away from any source of heat, sparks or flame.

Provide ventilation openings in the battery compart- ment. The minimum size of openings should be 2 square inches at the top of the compartment. Mount the battery on a strong, rigid supporting structure, where leaks and spills of battery fluid will not cause damage.

2.8Optional Accessories

A plug-in receptacle (Figure 2.17) is provided on the generator set. Use this receptacle to connect an optional remote-mounted start/stop panel to the generator. Installation of such a panel will permit starting and stopping the generator engine from any convenient location inside the vehicle.

Figure 2.17 – Remote Panel Plug-in Receptacle

6

14A

14A

5

15

15

4

18

18

3

14

14

2

17

17

1

0

0

12.00"

WIRE

WIRE

LENGTH (mm)

FUNCTION

No.

COLOR

 

 

0

WHITE

12.0 (305)

GROUND

14

RED

12.0 (305)

ENGINE RUN SIGNAL

15

ORANGE

12.0 (305)

12 VDC

17

YELLOW

12.0 (305)

START

18

BROWN

12.0 (305)

STOP

14A

BLUE

12.0 (305)

PRIME

P/N: 0D9099-B

2.8.1 remote start/stop panel

A remote mounted Start/Stop panel (Figure 2.18) is available that allows the user to start and stop the generator engine conveniently from inside the vehicle. The remote panel includes a Start/Stop switch, hour- meter, generator run lamp, a fuel prime switch, and a wire harness. The hourmeter should be used in conjunction with the maintenance operations found in Part I of this manual.

Figure 2.18 – Optional Remote Panel

FUEL

RUN

PRIME

STOP

30

Page 31 Page 33
Image 32
Page 31 Page 33
Contents Air-cooled Recreational Vehicle Generators Dealer Location Authorized ServiceIntroduction Table of Contents  General Hazards   Electrical Hazards  Generator Identification ModelSafety SpecificationsGenerator Applicability Generator ac Connection systemGenerator control panel Starting the generator Optional remote Start/stop panelBefore starting the engine Protection Systems Stopping the generatorDo not overload Generator Additional Information  2.8.3 field boost 2.8.4 overvoltage protection  2.9.1 25-HOUR BREAK-IN PeriodCHANGing the Engine OIL And/or Oil Filter Checking the Engine OILLevel Maintaining The Engine AIR Cleaner Clean air intake 3.3.1 cleaning the Foam Precleaner  3.3.2 cleaning or replacing the paper filterChecking the Engine Spark Plug Clean spark arrestorCleaning the Generator Exercising the Generator Battery MaintenanceOut of Service Procedure  3.11.2 Return To Service Adjusting Valve ClearanceRv generator service interval Part Installation Instructions  General Hazards   Electrical Hazards   Fire Hazards  Purpose and Scope Equipment DescriptionGenerator Engine Operating Speed Generator AC Connection SystemView from TOP Location and Support  2.1.1 Generator Location 2.2.2 Compartment Construction Generator Compartments 2.2.1 Compartment Size  2.2.3 Sound Insulating Materials  2.2.4 Acoustics 2.3.1 Generator airflow Cooling and Ventilating Air 2.2.5 Compartment Floor Cutouts  2.3.2 Testing the Installation LP Gas Fuel System 2.4.1 Parts not Included in Fuel System  2.4.2 Some Important Considerations 2.4.3 vapor withdrawal  2.4.4 primary regulator 2.4.5 Gaseous Carburetion  2.4.6 fuel supply lines 2.5.1 Spark Arrestor Exhaust System 2.4.8 leakage tests  2.5.2 Exhaust System Safety  2.6.2 WiringElectrical Connections  2.6.1 Electrical Junction BOX 2.6.4 Conduit  2.6.6 Power Supply Cord 2.6.3 Generator AC Connections 14 Transfer Switch Isolation Method Optional Accessories  2.7.3 Battery Cable Connections 2.7.4 Battery Compartment  2.8.1 remote start/stop panelPost Installation Tests Testing Under LoadBefore Initial START-UP Initial StartInstallation Checklist Troubleshooting Guide Problem Cause CorrectionAppendix 2 Electrical Data Supplied by Customer 24 7 QTY Description 21 2 ASSEMBLY, Brush Holder 274 Regulator Voltage Appendix 3 Exploded Views and Parts Lists GUARD, FAN Appendix 3 Exploded Views and Parts Lists Long Block Assembly 220 RV LP Recreational Vehicle Generator Regulator Drawing No F5819 CASTING, Twin Regulator Housing PURCHASER’S/OWNER’S Warranty Responsibilities Your Warranty Rights and ObligationsMANUFACTURER’S Emission Control System Warranty Coverage Emission Control System Warranty Emission Related Parts Include the FollowingWarranty Schedule Consumer/Personal Applications

004701-0 specifications

Guardian Technologies 004701-0 is a state-of-the-art air purifier designed to enhance indoor air quality and create a healthier living environment. This innovative device utilizes advanced technologies to combat airborne pollutants, allergens, and other harmful particles, making it an excellent choice for homes, offices, and other indoor spaces.

One of the standout features of the Guardian Technologies 004701-0 is its powerful True HEPA filtration system. True HEPA filters are capable of capturing 99.97% of particles as small as 0.3 microns, including dust, pollen, smoke, and pet dander. This ensures that the air you breathe is free from common allergens and irritants, promoting overall health and well-being.

In addition to its HEPA filter, the device incorporates a UV-C light technology that works to eliminate harmful bacteria and viruses. This dual-action air purification method not only filters out physical particles but also reduces the presence of microorganisms, further enhancing the air quality in your space. The UV-C light operates effectively without any chemicals, making it a safe and eco-friendly choice.

The Guardian Technologies 004701-0 is designed with user convenience in mind. It features a sleek, compact design that fits seamlessly into any room decor, and it operates quietly, ensuring that it does not disrupt your daily activities or sleep. The device also comes with multiple speed settings, allowing users to adjust the airflow based on their preferences and the size of the room.

Another notable characteristic of this air purifier is its filter replacement indicator. This feature alerts users when it’s time to replace the filter, ensuring that the unit operates at peak performance without any guesswork. The ease of maintenance makes it simple for users to keep the purifier running efficiently.

In conclusion, the Guardian Technologies 004701-0 is a powerful air purifier that combines advanced filtration and sanitization technologies to create a cleaner and healthier indoor environment. With its True HEPA filter, UV-C light, user-friendly design, and convenient features, it stands out as a reliable solution for improving indoor air quality and overall health. Whether you are looking to reduce allergens or simply breathe cleaner air, the Guardian Technologies 004701-0 is a wise investment for any household or workspace.
Top Page Image Contents