Great Dane GSRKA1934S manual Service Transmission, Replacing Fuel Filter

Page 24

SERVICE TRANSMISSION

Do not wash paper element.

Do not attempt to clean paper element by tapping against another object.

Do not use pressurized air to clean element.

Replace element only if it is very dirty, damaged or the seal is cracked.

NOTE: It may be necessary to check the air filter more frequently if operating machine in dusty conditions.

Check and clean air filter elements at the intervals recom- mended in the Service Intervals section. See the engine manufacturer’s owner’s manual provided with your machine for the complete procedure.

Checking Spark Plug

CAUTION: Avoid injury! Touching hot surfaces can burn skin. The engine, components, and fluids will be hot if the engine has been running. Allow the engine to cool before servicing or working near the engine and components.

Check spark plugs at the intervals recommended in the Service Intervals section. See the engine manufacturer’s owner’s manual provided with your machine for the com- plete procedure.

Cleaning Engine Oil Cooler - Kohler Engines

Keep engine oil cooler fins clear of debris to ensure proper cooling. See the engine manufacturer’s owner’s manual provided with your machine for the complete procedure.

Adjusting Carburetor

Carburetor is calibrated by the engine manufacturer and is not adjustable.

If engine is operated at altitudes above 1829 m (6,000 ft), some carburetors may require a special high altitude main jet. See your authorized dealer.

If engine is hard to start or runs rough, check the TROU- BLESHOOTING section of this manual.

Possible engine surging will occur at high throttle with transmission in “N” neutral and mower engagement lever disengaged. This is a normal condition due to the emission control system.

After performing the checks in the troubleshooting section and your engine is still not performing correctly, contact your authorized dealer.

Replacing Fuel Filter

CAUTION: Avoid injury! Fuel vapors are explo- sive and flammable:

Do not smoke while handling fuel.

Keep fuel away from flames or sparks.

Shut off engine before servicing.

Cool engine before servicing.

Work in a well-ventilated area.

Clean up spilled fuel immediately.

IMPORTANT: Avoid Damage! When installing a new fuel filter, the filter arrow must be pointed in the direction of the fuel flow.

1.Park machine safely. (See Parking Safely in the SAFETY section.)

2.Allow engine to cool.

3.Slide hose clamps (A) away from fuel filter (B).

4.Place drain pan under hoses to catch any fuel that may be left in the hoses.

5.Disconnect hoses from fuel filter (B).

6.Install new fuel filter (B).

Make sure fuel filter (B) is installed with arrow pointing in direction of fuel flow.

7.Connect hoses to new fuel filter (B).

8.Install hose clamps (A).

9.Start engine and check for fuel leaks.

SERVICE TRANSMISSION- 22

Image 24
Contents Great Dane GSRKA1934S Page Introduction Special MessagesSafety Labels Safety LabelsSafety-Alert Symbol Safety LabelsSafety Labels Safety SafetyUsing a Spark Arrestor Operating SafelyChecking Mowing Area Avoid Tipping Parking SafelyMaintenance and Storage Keep Riders OffAvoid High Pressure Fluids Checking Wheel HardwareTire Safety Prevent FiresHandling Fuel Safely Handling Waste Product and ChemicalsOperating OperatingAvoid Damage to Plastic and Painted Surfaces Operator Station ControlsAdjusting Cutting Height Mounting and Dismounting Machine SafelyRaising and Lowering Thigh Pad Setting Cutting Height Caster to deck mounting Upper PositonCaster to deck mounting Lower Positon Testing PTO Switch Testing Park Brake SwitchTesting Neutral Switch Start Testing Safety SystemsTesting the Park Brake Using the PTO Using Park BrakeUsing the Throttle Locking Park BrakeUsing the Hourmeter Using the Motion Control LeversForward and Reverse Motion Neutral PositionForward Gentle Right TurnReverse Sharp Left TurnStarting Engine Engaging MowerUsing Pump Free-Wheel Valves Stopping the EngineTransporting Machine on a Trailer Mowing TipsService Intervals Service IntervalsMowing Travel Speeds Servicing EngineService Engine Service LubricationLubricating Mower Deck Spindles Lubricating Mower Deck Idler PivotService Engine Engine OilChecking Engine Oil Level Changing Engine Oil and FilterCleaning Engine Air Intake Screen and Fan Checking and Cleaning Air Filter ElementsService Transmission Replacing Fuel FilterService Transmission Checking Hydraulic Oil LevelChanging Hydraulic Oil and Filter Hydraulic OilCleaning Hydraulic Oil Pump Cooling Fins Removing Traction Drive BeltInstalling Traction Drive Belt Checking and Adjusting Motion Control LinkagesChecking Motion Control Linkages Adjusting Motion Control Return to Neutral RTN Linkages Checking and Adjusting Transmission TrackingService Steering and Brakes Adjusting Forward and Reverse SpeedsAdjust Neutral Switch Service Mower Service Steering & BrakesService Mower Adjusting Park Brake Testing Park BrakeAdjusting Drive Belt Tension Installing Mower Deck Drive BeltReplacing Mower Deck Drive Belt Removing Mower Deck Drive BeltChecking for Bent Mower Blades Checking and Replacing Mower BladesService Electrical Service Electrical Service the Battery SafelySharpening Blades Balancing BladesChecking the Battery Sealed Batteries Removing and Installing BatteryInstalling Service Miscellaneous Using Booster BatteryCleaning Battery and Terminals Replacing FuseAdjusting Operator Presence Switch Service MiscellaneousUsing Proper Fuel Filling Fuel TankRemoving and Installing Rear Drive Wheels Removing and Installing Front Caster WheelsTightening Rear Drive Wheel Hardware RemovingChecking Tire Pressure Servicing Caster Wheel Roller BearingsTroubleshooting Cleaning and Repairing Plastic SurfacesCleaning and Repairing Metal Surfaces TroubleshootingStorage Electrical SystemMachine Park BrakeMower Deck Assembly StoragePreparing Machine for Storage Preparing Fuel and Engine For StorageSpecifications Assembly Connect HandlesCheck Hydraulic Oil Level Removing Machine From StorageGetting Quality Service Great Dane Quality Continues with Quality Service Part NumberWiring Diagram Wiring DiagramHydraulic Schematic Hydraulic SchematicPage Main Frame Assembly QTY Description Hydraulic and Handle Assembly QTY Description ENGINE, Hydraulic and Mainframe Assembly HOSE, 3/8 SAE30R7 Fuel & OIL Foot PLATE/CONSOLE Components Console ComponentsPLATE, Platform TAB LH Deck Assembly PULLEY, Flat 5.0X.38 W/BRG Wheel and Strut ASSEMBLY/PUMP Components WHEEL, Front 11X4X5 SLV Mist Spindle Assembly Spindle Assembly Decal Locations D18197 M117554