Great Dane GSRKA1934S manual Machine, Park Brake, Mower Deck

Page 41

STORAGE

• Neutral switches faulty or not adjusted properly. See your authorized dealer.

• Key switch or starter faulty. See

	your • authorized dealer.
	• PTO engaged.
	• Motion control levers and park
	brake lever not in proper
	position.
Battery Will Not	• Loose or corroded connections.
Charge
	• Blown fuse or fusible link. See
	your authorized dealer.
PTO Switch Does	• Blown fuse.
Not Work
	• PTO switch faulty.
Starter Turns Slowly	• Loose or corroded battery
	connections.
	• Low battery power-charge
	battery.
	• Engine oil viscosity too heavy.
	• Hydraulic pump linkage out of
	adjustment-pumps engaged.
Machine
If	Check
Excessive Machine	• Engine speed too slow.
Vibration
	• Deck drive belt not tensioned
	correctly.
	• Mower blades not balanced.
Machine Will Not	• Park brake locked.
Move With Engine
Running
	• Transmission oil level low.
	• Transmission oil cold – allow
	engine to warm up.
	• Pump drive belt slipping or
	broken.
	• Pump drive belt spring broken.
	• Pump free-wheel valves open.
	• Transmission problems. See your
	authorized dealer.

Machine Creeps	• Needs motion control linkage
With Engine	adjustment.
Running and Motion
Control Levers in a
Neutral Position
	• Needs Adjustment.

Park Brake

If	Check
Park Brake Not	• Park brake out of adjustment
Working Correctly	– adjust linkage.
Steering
If	Check
Steering Not	• Pump free-wheel valves partially
Working	open.
	• Improper tire inﬂation.
	• Hydrostatic transmission oil level
	low.
	• Traction drive loose or broken.
	• Hydraulic pump or wheel motor
	faulty.
Mower Deck
If	Check
Discharge Chute	• Grass is wet-mow grass only
Plugged	when dry.
	• Raise cutting height.
	• Mow with engine at full fast
	throttle.
	• Ground speed too fast for
	conditions.
	• Correct installation of deck drive
	belt.
Mower Deck	• Run engine at fast throttle.
Vibrates
	• Loose hardware.
	• Check/replace deck drive belt.
	• Blade bolts are loose.
	• Blades are bent or worn.
	• Sharpen and balance blades.

STORAGE - 39

Image 41

Contents Great Dane GSRKA1934S Page Special Messages IntroductionSafety Labels Safety LabelsSafety-Alert Symbol Safety LabelsSafety Labels Safety SafetyChecking Mowing Area Using a Spark ArrestorOperating Safely Parking Safely Avoid TippingKeep Riders Off Maintenance and StorageAvoid High Pressure Fluids Checking Wheel HardwarePrevent Fires Tire SafetyHandling Fuel Safely Handling Waste Product and ChemicalsOperating OperatingAvoid Damage to Plastic and Painted Surfaces Operator Station ControlsRaising and Lowering Thigh Pad Adjusting Cutting HeightMounting and Dismounting Machine Safely Caster to deck mounting Lower Positon Setting Cutting HeightCaster to deck mounting Upper Positon Testing Park Brake Switch Testing PTO SwitchTesting Neutral Switch Start Testing Safety SystemsUsing Park Brake Testing the Park Brake Using the PTOUsing the Throttle Locking Park BrakeUsing the Motion Control Levers Using the HourmeterForward and Reverse Motion Neutral PositionGentle Right Turn ForwardReverse Sharp Left TurnEngaging Mower Starting EngineStopping the Engine Using Pump Free-Wheel ValvesTransporting Machine on a Trailer Mowing TipsService Intervals Service IntervalsMowing Travel Speeds Servicing EngineService Lubrication Service EngineLubricating Mower Deck Spindles Lubricating Mower Deck Idler PivotEngine Oil Service EngineChecking Engine Oil Level Changing Engine Oil and FilterChecking and Cleaning Air Filter Elements Cleaning Engine Air Intake Screen and FanReplacing Fuel Filter Service TransmissionChecking Hydraulic Oil Level Service TransmissionChanging Hydraulic Oil and Filter Hydraulic OilRemoving Traction Drive Belt Cleaning Hydraulic Oil Pump Cooling FinsChecking Motion Control Linkages Installing Traction Drive BeltChecking and Adjusting Motion Control Linkages Checking and Adjusting Transmission Tracking Adjusting Motion Control Return to Neutral RTN LinkagesAdjust Neutral Switch Service Steering and BrakesAdjusting Forward and Reverse Speeds Service Steering & Brakes Service MowerService Mower Adjusting Park Brake Testing Park BrakeInstalling Mower Deck Drive Belt Adjusting Drive Belt TensionReplacing Mower Deck Drive Belt Removing Mower Deck Drive BeltChecking and Replacing Mower Blades Checking for Bent Mower BladesService Electrical Service the Battery Safely Service ElectricalSharpening Blades Balancing BladesInstalling Checking the Battery Sealed BatteriesRemoving and Installing Battery Using Booster Battery Service MiscellaneousCleaning Battery and Terminals Replacing FuseService Miscellaneous Adjusting Operator Presence SwitchUsing Proper Fuel Filling Fuel TankRemoving and Installing Front Caster Wheels Removing and Installing Rear Drive WheelsTightening Rear Drive Wheel Hardware RemovingServicing Caster Wheel Roller Bearings Checking Tire PressureCleaning and Repairing Plastic Surfaces TroubleshootingCleaning and Repairing Metal Surfaces TroubleshootingElectrical System StorageMower Deck MachinePark Brake Storage AssemblyPreparing Machine for Storage Preparing Fuel and Engine For StorageAssembly Connect Handles SpecificationsCheck Hydraulic Oil Level Removing Machine From StorageGetting Quality Service Part Number Great Dane Quality Continues with Quality ServiceWiring Diagram Wiring DiagramHydraulic Schematic Hydraulic SchematicPage Main Frame Assembly QTY Description Hydraulic and Handle Assembly QTY Description ENGINE, Hydraulic and Mainframe Assembly HOSE, 3/8 SAE30R7 Fuel & OIL Console Components Foot PLATE/CONSOLE ComponentsPLATE, Platform TAB LH Deck Assembly PULLEY, Flat 5.0X.38 W/BRG Wheel and Strut ASSEMBLY/PUMP Components WHEEL, Front 11X4X5 SLV Mist Spindle Assembly Spindle Assembly Decal Locations D18197 M117554