Great Dane GSRKA1934S manual Checking Tire Pressure, Servicing Caster Wheel Roller Bearings

SERVICE MISCELLANEOUS

2.Tighten wheel nuts in numbered sequence shown for safe wheel installation. Tighten alternately until recom- mended torque value is reached.

Checking Tire Pressure

CAUTION: Avoid injury! Explosive separation of tire and rim parts is possible when they are serviced incorrectly:

•Do not attempt to mount a tire without the proper equipment and experience to perform the job.

•Do not inflate the tires above the recom- mended pressure.

•Do not weld or heat a wheel and tire as- sembly. Heat can cause an increase in air pressure resulting in an explosion. Welding can structurally weaken or de- form the wheel.

•Do not stand in front or over the tire assembly when inflating. Use a clip-on chuck and extension hose long enough to allow you to stand to one side.

1.Check tires for damage.

2.Check tire pressure with an accurate gauge.

3.Add air, if necessary:

Tire Size	Pressure
Front: 11 x 4 - 5	138–173 kPa (20-25 psi)
Rear: 18 x 6.5 - 8	69–97 kPa (10–14 psi)

Servicing Caster Wheel Roller Bearings

1.Park machine safely. (See Parking Safely in the SAFETY section.)

2.Raise and securely support front of machine.

SERVICE MISCELLANEOUS - 36