SERVICE MOWER
Picture Note: Engine removed for picture clarity.
1.Park machine safely. (See Parking Safely in the SAFETY section.)
2.Loosen nuts (A).
3.Adjust neutral switch (B).
•If neutral switch sensitivity needs to be increased, adjust switch (B) down in slots.
•If neutral switch sensitivity needs to be decreased, adjust switch (B) up in slots.
4.Tighten nuts (A).
Service Steering & Brakes
Adjusting Park Brake
Testing Park Brake:
1. Inflate tires to correct pressures.
2.Stop machine on a maximum 17° slope.
3.Lock park brake.
•A properly adjusted park brake must prevent the drive wheels from turning.
•If the drive wheels turn, a brake adjustment will be necessary.
Adjusting Park Brake:
1.Park machine safely. (Refer to Parking Safely in the SAFETY section.)
2.Unlock park brake.
A 
C
B
Picture Note: Battery Box and Battery removed for clarity.
3.Remove rue clip (B).
4.Turn brake linkage yoke in
5.Install rue clip (B).
6.Test park brake. Adjust again, if required.
Service Mower
Removing and Installing Mower Deck Shield
CAUTION: Avoid injury! Help prevent serious personal injury. Do not operate the mower with- out the mower deck shield installed.
Removing Mower Deck Shield:
1. Park machine safely. (See Parking Safely in the SAFETY section.)
A
2. Remove two knobs (A).
SERVICE MOWER - 28