Bush Hog 3860 QT manual Dealer Preparation Check List

Page 5

DEALER PREPARATION CHECK LIST

3860 QT LOADER

BEFORE DELIVERING MACHINE - The following check list should be completed. Use the Operator’s Manual as a guide.

❏Machine properly assembled.

❏All safety decals readable. (See decal page)

❏All bolts tightened to torque specifications given in torque chart.

❏Machine operates properly.

❏Customer has appropriate mounting kit for his tractor and loader.

❏Customer has appropriate attachments for loader operations. ( Buckets for lifting loose materials; bale spear for lifting round bales; fork lift for lifting palletized material)

CAUTION

IT IS RECOMMENDED THAT TRACTOR BE

EQUIPPED WITH ROLLOVER PROTECTIVE SYS-

TEM (ROPS) AND SEAT BELT BE USED FOR ALL

LOADER OPERATIONS.

❏Operators manual has been delivered to owner and he has been instructed on the safe and proper use of the front end loader.

Dealer’s Signature

THIS CHECK LIST TO REMAIN IN OPERATOR’S MANUAL

It is the responsibility of the dealer to complete the procedures listed

above before delivery of this implement to the customer.

3

Image 5

Contents Bush HOG Congratulations 3860 QT Table of ContentsDisclaimer of Implied Warranties & Consequential Damages This Limited Warranty Shall not ApplyDealer Preparation Check List Loader Important Safety PrecautionsTractor Operating the Loader Safety PrecautionsEmployee Tractor Operating Instructions EMPLOYERS, Employees and OperationsDescription Introduction and DescriptionIntroduction Model 3860 QT Technical Specifications Installation Installation InstructionsTractor Preparation Important NoticeSubframe Crosstube Forward SideFront Bracket Torque Identification Lift and Support ALL Loader COMPO- Nents SafelyTransmission Fluid PRE-OPERATION InstructionsInitial Loader Operation External Loader AND/OR Tractor ValveNeutral Position Bucket Level IndicatorFloat Position Initial Loader OperationRemote Hoses Support Loader Lubrication MaintenanceDaily Checks Operating Instructions General SafetyBucket Level Gauge ROD OperationLifting the Load Filling the BucketDumping the Bucket Carrying the LoadLowering the Bucket Not this Do this Dump Lower LeverFloat Surface Material Loading from a Bank Operating with Float ControlFloat Backfilling Peeling and Scraping3RD CUT , 4TH CUT, ETC Do this Loading LOW Trucks or Spreaders from a PileBack Grading Soil PileSetting recommended Troubleshooting Procedures Problem Possible Cause RemedyDismounting the Loader Page Mounting the Loader Page Installation & Operation of Quick Draw Latch Attach Upper channel Weld-in center support Bucket or attachment Installing Bucket or Attachment to Quick Draw Latch Attach Page Removing Bucket or Attachment from Quick Draw Latch Attach Single Tine KIT Bucket AttachmentQuick Draw Bucket Super Penetrator Bale Probe Attachment Operating Instructions for Dismounting Dozer from Loader Dozer AttachmentManure Fork Attachment Parking Angles Pallet Fork AttachmentGrapple Attachment Page Operating Instructions Page Supplemental Instructions For Ford Genesis Special Safety Decals Decals American Torque Specifications