Bush Hog RMB 1445 manual Operating the Attached Mower Heads, Grass Flail, Sickle Bar

OPERATION

11.6 Operating the Attached Mower Heads

Refer to the Assembly Section of this manual to ensure the head is properly attached to the boom hitch and hydraulic lines are properly connected.

There are obvious and hidden potential hazards in the operation of this Mower. REMEMBER! This machine is often operated in heavy brush and in heavy weeds. The Blades of this Mower can throw objects if shields are not properly installed and maintained. Serious injury or even death may occur unless care is taken to insure the safety of the operator, bystanders, or passersby in the area. Do not operate this machine with anyone in the immediate area. Stop mowing if anyone is within 300 feet of mower. (SGM-02)

Grass Flail

•The Grass Flail head is rated for cutting grass and small brush up to 1-1/2”.

•The Grass Flail operates attached to the boom arm, and is ideal for cutting hard to reach areas where a smooth cut is required.

•Cutting height ranges from 3/4” to 4” in vegetation. Cutting height is set by adjusting the height of the roller assembly.

•When operating near the ground or when mulching be particularly careful that there are no bystanders or animals with a 300 feet. Debris tends to fly out at great speed and can injure or even cause death. OPS-B- 0040_B

Sickle Bar

•The Sickle Bar Cutter will cut a 5’ swath through tough weeds and grass.

•The Sickle Bar Cutter is operated attached to the boom arm and is ideal for vegetation maintenance

•When operating the Sickle Bar correctly it will give you a fast, efficient, and cost-effective method of vegetation maintenance.

•The Sickle Bar will also cut vegetation through tough weeds under water, ideal for maintaining ponds, creeks, and other areas that may be under shallow water.

•When operating the unit be sure there are no bystanders or animals within 300 feet of the unit. OPS-B- 0049

RMB 1445 11/10 Operation Section 4-37

© 2010 Alamo Group Inc.

OPERATION