Exmark TTS18KA523, TTS16KA363CA, TTS16KA483CA, TTS20KAE523, TTS20KAE483CA manual Safety

Page 6

Safety

DANGER

In certain conditions gasoline is extremely flammable and vapors are explosive.

A fire or explosion from gasoline can burn you, others, and cause property damage.

Fill the fuel tank outdoors on level ground, in an open area, when the engine is cold. Wipe up any gasoline that spills.

Never refill the fuel tank or drain the machine indoors or inside an enclosed trailer.

Do Not fill the fuel tank completely full. Fill the fuel tank to the bottom of the filler neck. The empty space in the tank allows gasoline to expand. Overfilling may result in fuel leakage or damage to the engine or emission system.

Never smoke when handling gasoline, and stay away from an open flame or where gasoline fumes may be ignited by spark.

Store gasoline in an approved container and keep it out of the reach of children.

Add fuel before starting the engine. Never remove the cap of the fuel tank or add fuel when engine is running or when the engine is hot.

If fuel is spilled, Do Not attempt to start the engine. Move away from the area of the spill and avoid creating any source of ignition until fuel vapors have dissipated.

Do Not operate without entire exhaust system in place and in proper working condition.

DANGER

In certain conditions during fueling, static electricity can be released causing a spark which can ignite gasoline vapors. A fire or explosion from gasoline can burn you and others and cause property damage.

Always place gasoline containers on the ground away from your vehicle before filling.

Do Not fill gasoline containers inside a vehicle or on a truck or trailer bed because interior carpets or plastic truck bed liners may insulate the container and slow the loss of any static charge.

When practical, remove gas-powered equipment from the truck or trailer and refuel the equipment with its wheels on the ground.

If this is not possible, then refuel such equipment on a truck or trailer from a portable container, rather than from a gasoline dispenser nozzle.

If a gasoline dispenser nozzle must be used, keep the nozzle in contact with the rim of the fuel tank or container opening at all times until fueling is complete.

WARNING

Gasoline is harmful or fatal if swallowed. Long-term exposure to vapors has caused cancer in laboratory animals. Failure to use caution may cause serious injury or illness.

Avoid prolonged breathing of vapors.

Keep face away from nozzle and gas tank/container opening.

Keep away from eyes and skin.

Never siphon by mouth.

Check that the operator’s presence controls, safety switches, and shields are attached and functioning properly. Do Not operate unless they are functioning properly.

6

Image 6
Contents Turf Tracer Series California Introduction Contents Safe Operating Practices SafetySafety Alert Symbol TrainingSafety Operation Slope OperationMaintenance and Storage Safety Safety and Instructional Decals 413327 103-1977 109-3148 116-0404 117-2718 Specifications Model NumbersSystems Dimensions Product Overview Torque RequirementsOperation ControlsTracking Adjustment Knob Off-Run Switch Manual Start OnlyIgnition Switch Electric Start Only Park Brake LeverOpen the Fuel Shut-Off Valve Pre-StartOperating Instructions Starting the Engine Manual StartDriving the Machine Disengaging the PTOStopping the Engine Drive Lever/Neutral Lock Latch OperationAdjusting the Cutting Height Driving ForwardDriving in Reverse Adjusting the Anti-Scalp Rollers Transporting Transporting a UnitMaintenance Recommended Maintenance SchedulesCheck Battery Charge Electric Start Units Only Check Engine Oil LevelProposition 65 Warning Service Interval As required Do Not jump start a weak battery if these conditions existInstall bushing/blade assembly into spindle Check Mower BladesReplacing the Discharge Deflector Check Safety Interlock System Service Air CleanerCheck for Loose Hardware Check Condition Of Belts Change Engine OilCheck Tire Pressures Check Hydraulic Oil LevelChange Hydraulic System Filter Check Spark PlugsChange Fuel Filter LevelHydraulic System Air Purge Style a black finish Wheel Hub-Slotted Nut Torque SpecificationReplace Emissions Air Intake Filter Torque the slotted nut to 140-155 ft-lb 190-210 N-mMobil HTS Grease Or Food-Grade Anti-seize Inspect PTO Clutching Belt TensionThread Locking Adhesives Copper-Based Anti-seizeDeck Leveling Park Brake AdjustmentHydro Drive Linkage Adjustment Pump Drive Belt TensionAdjust Hydro Control Linkages Repeat above adjustments if necessaryTracking Adjustment Hydro Pump Spring Tension SettingDrive Lever Linkage Adjustment Remove Engine Shrouds and Clean Cooling Fins PTO Safety SwitchClean Engine and Exhaust System Area Retighten PTO switch mounting hardwareBattery Disposal Clean Debris From MachineClean Grass Build-Up Under Deck Waste DisposalTroubleshooting Problem Possible Cause Corrective ActionTroubleshooting Schematics Electrical DiagramSchematics Hydraulic Diagram Exmark Commercial Turf Equipment Service Record Date Description of Work Done Service Done ByPage This page may be copied for personal use See EXMARK’S Complete Line of Accessories and Options