2.6SEAT
2.6.1Type: Deluxe suspension seat high back, low profile
2.6.2Mounting: Hinged to tilt up for access to hydraulic pumps, battery and other components. Held in tilted position with
2.6.3Armrests: Molded adjustable
2.6.4Seat Safety Switch: Incorporated into the Safety Interlock System. Time delay seat switch eliminates rough ground
2.7HYDROSTATIC GROUND DRIVE SYSTEM
2.7.1Hydrostatic Pumps: Two Hydro Gear PW variable displacement piston pumps.
2.7.2Wheel Motors: Two Parker/Ross with 1 1/4” tapered shafts.
2.7.3Hydraulic Oil Type: Synthetic Mobil 1
2.7.4Hydraulic Oil Capacity: 5.5 qt. (5.2 L.)
2.7.5Hydraulic Filter: Replaceable cartridge type.
P/N
2.7.6Speeds:
2.7.7Drive wheel release valves allow machine to be moved when engine is not running.
2.8 TIRES | Drive | |
|
| Pneumatic |
| Quantity | 2 |
| Tread | “Multi- Trac C/S” |
| Size | 26 x |
| Ply Rating | 4 |
| Pressure | 10 psi (90 kPa) |
Front Caster
2
Smooth
13 x
2.9 CUTTING DECK
2.9.1 | Cutting Width: | 60 in. (152.4 cm) |
|
| 72 in. (182.9 cm) |
2.9.2Discharge: Side
2.9.3 | Blade Size: (3 ea.) 60” Deck: 20.5 in. (52.1 cm) |
| 72” Deck: 24.5 in. (62.2 cm) |
2.9.4Blade Spindles: Solid steel spindles with 1” I.D. bearings.
2.9.5Deck Drive: Electric clutch mounted on horizontal engine shaft. “B” Section belt (with
Blades are driven by one “B” Section belt
2.9.6Deck: Full floating deck is attached to
Deck Depth: 60” Deck: 5.5” (14.0 cm) 72” Deck: 5.5” (14.0 cm)
2.9.7Cutting Height Adjustment: an
2.9.8Mulching Kit: Optional.
-12 -