Husqvarna Rider 320 AWD Safety Instructions, Safety instructions, Insure your Rider, General use

Page 8

SAFETY INSTRUCTIONS

Safety instructions

These instructions are for your safety. Read them carefully.

Insure your Rider

Check the insurance coverage for your new Rider.

Contact your insurance company.

You should have fully comprehensive insurance including: third party, fire, damage, theft and liability

General use

Read all the instructions in this operator’s manual and on the machine before you start it. Ensure you understand them and then observe them.

WARNING! This machine produces an

!electromagnetic field during operation. This field may under some circumstances interfere with active or passive medical implants. To reduce the risk of serious or fatal injury, we recommend persons with medical implants to consult their physician and the medical implant manufacturer before operating this machine.

Learn how to use the machine and its controls safely and learn to how to stop quickly. Also learn to recognize the safety decals.

Only allow the machine to be used by adults who are familiar with its use.

Make sure nobody else is in the vicinity of the machine when you start the engine, engage the drive or drive off.

Clear the area of objects such as stones, toys, wires, etc. that may become caught in the blades and be thrown out.

Look out for the ejector and do not direct it towards anyone.

Stop the engine and prevent it from starting before you clean the cutting unit.

Remember that the driver is responsible for dangers or accidents.

Never carry passengers. The machine is only intended to be used by one person.

Always look downwards and backwards before and while reversing. Keep watch for both large and small obstacles.

Slow before cornering.

Switch off the blades when you are not mowing.

Take care when rounding a fixed object, so that the blades do not hit it. Never run the machine over foreign objects.

!

WARNING! This machine can sever hands

and feet as well as throw objects. Failure to

observe the safety instructions can result in

 

serious injuries.

!

WARNING! The inside of the muffler contain

chemicals that may be carcinogenic. Avoid

contact with these elements in the event of a

 

damaged muffler.

!

WARNING! The engine emits carbon

monoxide, which is a colourless, poisonous

gas. Do not use the machine in enclosed

 

spaces.

Only use the machine in daylight or in other well-lit conditions. Keep the machine at a safe distance from holes or other irregularities in the ground. Pay attention to other possible risks.

Never use the machine if you are tired, if you have consumed alcohol, if you are taking other drugs or medication that can affect your vision, judgement or co- ordination.

Never use the machine in bad weather, for instance in fog, in rain, damp or in wet locations,strong winds, intense cold, risk of lightning, etc.

Keep an eye on the traffic when working close to a road or when crossing it.

Never leave the machine unsupervised with the engine running. Always stop the blades, apply the parking brake, stop the engine and remove the keys before leaving the machine.

8 – English

Image 8
Contents Rider 318 Rider 320 AWD Contents After the first 8 hours Service journalPre-delivery service Introduction KEY to Symbols SymbolsKEY to Symbols What is WHAT? Location of the controlsSafety Instructions Safety instructionsInsure your Rider General useDriving on slopes This is what you doMaintenance ChildrenTransport Presentation Seat FuelingRelease lever Release lever RiderDriving Before startingStart the engine Starting a cold engineStarting the engine with a weak battery Connecting the jump leadsDriving the Rider Stop the engineMaintenance Maintenance scheduleRemoving of the machine hoods CleaningChecking and adjusting the steering wires Adjusting the parking brake Rider Adjusting the parking brake Rider 320 AWDChecking and adjusting of throttle wire Can result in reduced braking abilityReplacement of fuel filter Replacing the air filterChecking the fuel pump’s air filter Cool before starting to replace the air filterCheck the safety system Ignition systemMain fuse Checking the tyre pressureFitting the cutting head Trapping your handChecking the cutting unit’s parallelism Adjusting the parallelism of the cutting unitRemoving the cutting unit Replacing the cutting unit belts Restoring from service position Service position for the cutting unitPlacing in the service position Checking the blades Replacing the bladesRemoving the BioClip plug Combi 103, CombiLubrication Checking the engine’s oil levelChanging the oil filter Replacing the engine oilGeneral lubrication Lubricating the belt adjusterChecking the transmission oil level Troubleshooting schedule Service StorageWinter storage GuardTechnical Data Blade EC Declaration of Conformity Applies to Europe onlyCutting unit Combi 1156985-26 ´z+X§T¶6X¨ ´z+X§T¶6X¨ Original instructions