Husqvarna Robotic Lawn Mowe manual 3012-284 3012-264

Page 32

3. Installation

2.Slide in the ends of the boundary wire in the lowermost holes on the charging station and catch them in the uppermost holes.

The right hand wire end should be inserted in the right hand hole, and the left hand wire end in the left hand hole.

IMPORTANT INFORMATION

The boundary wire must not be crossed when connecting to the charging station. Therefore the right hand wire end must be connected to the right hand connector on the charging station and vice versa.

3.Place the cable ends in the connector:

•Open the connector.

•Place the wire in the connector grip.

4.Press the connector together using a pair of pliers. Press until you hear a click.

3012-508

3012-506

3012-284

3012-264

32 Automower from ™

Image 32

Contents Operator’s manual Page Table of contents Table of contents Introduction and safety IntroductionSymbols on Automower Symbols in the Operator’s Manual Xxxxxx xxxxx xxxx xxxx xxxxxSafety instructions UseMaintenance TransportPresentation Automower, what’s what? Numbers in the picture correspond toMowing technique Function of AutomowerCapacity Working method 3012-388 3012-700 3012-400 Search method 1 Irregular Search methodMovement pattern Search method 3 Follow guide wire Search method 2 Follow loopMore than one Automower in a garden One Automower in several gardensInstallation Carry out the installation in the following stepsIdeal position of the charging station Installation of the charging stationPreparations Low voltage cable must not be extended Installation and connecting the charging station Do not tread or walk on the charging station plate Best position for the boundary wire Charging the batteryInstallation of the boundary wire 30 cm Boundaries for the working area10 cm Boundaries within the working area Secondary areasPassages when mowing Passages when searching for the charging stationSlopes Laying out the boundary wire Laying the boundary wire in towards the charging station Connecting the boundary wire Joining the boundary wire3012-284 3012-264 Checking the installation Linking the Automower to the charging station Installation of the guide wireNeed of a guide wire 3012-669 Placement and connection of the guide wire Maximum 3012-675 Charging a discharged battery UseStopping the Automower Using the timerStarting the Automower Switching off the Automower RestartRestart within 20 seconds Restart after more than 20 secondsAdjusting the cutting height Control panel Shortcuts Programs SelectMain switch NumbersMenu functions Main menuBrowse between menus Number seriesAutomower main menu AutomowerCommands TimerWeekend timer Timer overrideDay timer Mon Tue Wed Thu Fri Sat Sun Run all Week timerGarden Exit angles Follow loop out Follow loopProportion first Proportion DirectionDistance Follow loop Corridor width Test OUT When Test in 3-2-4 is used, the house iconTest Garden shape OpenNormal ComplexCheck loop Drive past wireAdvanced Settings SecurityPIN code Time lockStop protection Settings lock SoundsOperation KeypadLanguage Sound SignificanceTime and date Garden example proposed installation and settings Garden shape OpenCorridor width Guide wire Garden shape Normal Distance 40 m and Proportion 20 %. Area Proportion 40 %3012-530 Maintenance Battery ServiceWinter storage AutomowerUnderframe and blade disc CleaningAfter winter storage Do not use running water when cleaning Replacing the bladesChassis Wheels3012-260 Trouble shooting Fault messagesTrouble shooting Symptom Cause Action Uneven mowing ResultsAutomower runs at Wrong timeData Automower from Husqvarna Technical dataEnvironmental Information EU declaration of conformity EU Declaration of Conformity only applies to EuropeEU declaration of conformity Index AutoMain menu 43, 47 Start Automower Working area Boundaries Automower from Automower from Page 2005W48