6. Menu functions
•Test IN (3-2-4)
The Test IN |
| |
Follow loop out | ||
Automower finds its way into the charging | ||
| ||
station. |
|
Follow loop in
Corridor width
Test IN
Test OUT
| |
When the function is selected, the mower will |
|
directly follow the boundary wire or guide wire, |
|
depending on which one is found first, in to the |
|
charging station. If there is a passage and the |
|
mower can not run through it, the Corridor width |
|
value is set too high. |
|
The adjacent picture shows how an Automower |
|
negotiates a passage when a value of 5 is set for |
|
the Corridor width, but not when a value of 6 is |
|
set. |
|
IMPORTANT INFORMATION |
|
When Test IN | |
| |
on the display will come on and the mower |
|
will remain in the charging station. Press the |
|
Home button to return to operations. |
|
•Test OUT (3-2-5)
The Test OUT
To test the settings for Follow loop out
•State the value 100 % for Proportion for the remote area to be tested. Place Automower in the charging station and select Test OUT
Follow loop out
Follow loop in
Corridor width
Test IN
Test OUT
Automower from | ™ 57 |