Husqvarna Robotic Lawn Mowe manual Commands, Timer

6. Menu functions

6.3 Commands (1)

This option in the main menu allows you to access the following functions on the Automower.

•Charge then AUTO (1-1)

in order for the Automower to drive immediately to the charging station, charge the battery and then return to the automatic operating mode. Select the function and press YES when the cursor is on Yes.

•Show latest faults (1-2)

to show the list of saved fault messages. Browse with the arrow buttons. The list can contain up to 20 fault messages and each message is shown with the date and time.

•Make factory settings (1-3)

to restore all settings to their original values. Everything except the language, PIN code and the settings under the buttons A, B and are reset. Select the function, enter your PIN code and press YES when the cursor is on Yes.

6.4 Timer (2)

The lawn should not be cut too often to obtain the best mowing result. Consequently, it is important to limit the operating time using the timer function if the working area is less than 1800 m2. When Automower is allowed to mow too much, the lawn may appear flattened. Besides, the mower is subjected to unnecessary wear.

The timer function is also an ideal means to control during which periods the Automower should not mow, for example, when the children are playing in the garden.

When you set the timer, assume that Automower mows about 75 m2 per hour.

•Timer override (2-1)

to temporarily disconnect the timer function.

•Day timer (2-2)

to set the start and stop times.

•Weekend timer (2-3)

to set other start and stop times for the days Friday - Sunday.

•Week timer (2-4)

to select which days of the week the Automower should mow.

Commands

Timer

Garden

Settings

1

Commands

Timer

Garden

Settings

2

Charge then AUTO

Show latest faults

Make factory sett. 1-

Timer override

Day timer

Weekend timer

Week timer

2-

Automower from ™ 49