Husqvarna Robotic Lawn Mowe manual Time and date

Page 64

6. Menu functions

Time and date (4-4)

Using this function you can change the time and date on the Automower.

You can also change the format selections you made when the Automower was first started via this function.

•Set time (4-4-1)

Move the cursor to Set time and press YES. Now enter the correct time and finish with YES.

•Set date (4-4-2)

Move the cursor to Set date and press YES. Now enter the correct date and finish with YES.

Security

Sounds

Language

Time and date

4-4

Set time

Set date

Time format

Date format

4-4-

•Time format (4-4-3)

Move the cursor to Time format and press YES. Move the cursor to the required time format:

•12h or

•24h.

Finish by pressing YES.

•Date format (4-4-4)

Move the cursor to Date format and press YES. Move the cursor to the required date format:

•YY-MM-DD(year-month-day),

•MM-DD-YY(month-day-year) or

•DD-MM-YY(day-month-year).

Finish by pressing YES.

64 Automower from ™

Image 64

Contents Operator’s manual Page Table of contents Table of contents Introduction and safety IntroductionSymbols on Automower Symbols in the Operator’s Manual Xxxxxx xxxxx xxxx xxxx xxxxxSafety instructions UseMaintenance TransportPresentation Automower, what’s what? Numbers in the picture correspond toCapacity Function of AutomowerMowing technique Working method 3012-388 3012-700 3012-400 Movement pattern Search methodSearch method 1 Irregular Search method 3 Follow guide wire Search method 2 Follow loopMore than one Automower in a garden One Automower in several gardensInstallation Carry out the installation in the following stepsPreparations Installation of the charging stationIdeal position of the charging station Low voltage cable must not be extended Installation and connecting the charging station Do not tread or walk on the charging station plate Installation of the boundary wire Charging the batteryBest position for the boundary wire 30 cm Boundaries for the working area10 cm Boundaries within the working area Secondary areasPassages when mowing Passages when searching for the charging stationSlopes Laying out the boundary wire Laying the boundary wire in towards the charging station Connecting the boundary wire Joining the boundary wire3012-284 3012-264 Checking the installation Need of a guide wire Installation of the guide wireLinking the Automower to the charging station 3012-669 Placement and connection of the guide wire Maximum 3012-675 Charging a discharged battery UseStarting the Automower Using the timerStopping the Automower Switching off the Automower RestartRestart within 20 seconds Restart after more than 20 secondsAdjusting the cutting height Control panel Shortcuts Programs SelectMain switch NumbersMenu functions Main menuBrowse between menus Number seriesAutomower main menu AutomowerCommands TimerDay timer Timer overrideWeekend timer Garden Week timerMon Tue Wed Thu Fri Sat Sun Run all Exit angles Proportion first Follow loopFollow loop out Distance DirectionProportion Follow loop Corridor width Test When Test in 3-2-4 is used, the house iconTest OUT Garden shape OpenNormal ComplexAdvanced Drive past wireCheck loop Settings SecurityPIN code Time lockStop protection Settings lock SoundsOperation KeypadLanguage Sound SignificanceTime and date Garden example proposed installation and settings Garden shape OpenCorridor width Guide wire Garden shape Normal Distance 40 m and Proportion 20 %. Area Proportion 40 %3012-530 Maintenance Battery ServiceWinter storage AutomowerAfter winter storage CleaningUnderframe and blade disc Do not use running water when cleaning Replacing the bladesChassis Wheels3012-260 Trouble shooting Fault messagesTrouble shooting Symptom Cause Action Uneven mowing ResultsAutomower runs at Wrong timeEnvironmental Information Technical dataData Automower from Husqvarna EU declaration of conformity EU Declaration of Conformity only applies to EuropeEU declaration of conformity Index AutoMain menu 43, 47 Start Automower Working area Boundaries Automower from Automower from Page 2005W48