Husqvarna Robotic Lawn Mowe manual 30 cm, Boundaries for the working area

Page 24

3. Installation

•The boundary wire is laid at different distances from obstacles depending on what the working area borders. The picture below shows how the boundary wire should be routed around the working area and around obstacles.

3012-688

Boundaries for the working area

If a high obstacle, for example a wall or fence, borders the working area, the boundary wire should be laid 35 cm from the obstacle. This will prevent the Automower from colliding with the obstacle and reduce body wear.

35 cm

3012-382

If the working area borders against a small ditch, for example, a flower bed or a small elevation, e.g. a low verge (3 - 5 cm), the boundary wire should be laid 30 cm inside the working area. This prevents the wheels from driving into the ditch or up onto the verge.

30 cm

3012-381

24 Automower from ™

Image 24

Contents Operator’s manual Page Table of contents Table of contents Introduction and safety IntroductionSymbols on Automower Symbols in the Operator’s Manual Xxxxxx xxxxx xxxx xxxx xxxxxSafety instructions UseMaintenance TransportPresentation Automower, what’s what? Numbers in the picture correspond toFunction of Automower CapacityMowing technique Working method 3012-388 3012-700 3012-400 Search method Movement patternSearch method 1 Irregular Search method 3 Follow guide wire Search method 2 Follow loopMore than one Automower in a garden One Automower in several gardensInstallation Carry out the installation in the following stepsInstallation of the charging station PreparationsIdeal position of the charging station Low voltage cable must not be extended Installation and connecting the charging station Do not tread or walk on the charging station plate Charging the battery Installation of the boundary wireBest position for the boundary wire 30 cm Boundaries for the working area10 cm Boundaries within the working area Secondary areasPassages when mowing Passages when searching for the charging stationSlopes Laying out the boundary wire Laying the boundary wire in towards the charging station Connecting the boundary wire Joining the boundary wire3012-284 3012-264 Checking the installation Installation of the guide wire Need of a guide wireLinking the Automower to the charging station 3012-669 Placement and connection of the guide wire Maximum 3012-675 Charging a discharged battery UseUsing the timer Starting the AutomowerStopping the Automower Switching off the Automower RestartRestart within 20 seconds Restart after more than 20 secondsAdjusting the cutting height Control panel Shortcuts Programs SelectMain switch NumbersMenu functions Main menuBrowse between menus Number seriesAutomower main menu AutomowerCommands TimerTimer override Day timerWeekend timer Week timer GardenMon Tue Wed Thu Fri Sat Sun Run all Exit angles Follow loop Proportion firstFollow loop out Direction DistanceProportion Follow loop Corridor width When Test in 3-2-4 is used, the house icon TestTest OUT Garden shape OpenNormal ComplexDrive past wire AdvancedCheck loop Settings SecurityPIN code Time lockStop protection Settings lock SoundsOperation KeypadLanguage Sound SignificanceTime and date Garden example proposed installation and settings Garden shape OpenCorridor width Guide wire Garden shape Normal Distance 40 m and Proportion 20 %. Area Proportion 40 %3012-530 Maintenance Battery ServiceWinter storage AutomowerCleaning After winter storageUnderframe and blade disc Do not use running water when cleaning Replacing the bladesChassis Wheels3012-260 Trouble shooting Fault messagesTrouble shooting Symptom Cause Action Uneven mowing ResultsAutomower runs at Wrong timeTechnical data Environmental InformationData Automower from Husqvarna EU declaration of conformity EU Declaration of Conformity only applies to EuropeEU declaration of conformity Index AutoMain menu 43, 47 Start Automower Working area Boundaries Automower from Automower from Page 2005W48