Husqvarna Robotic Lawn Mowe manual Language, Sound Significance

Page 63

6. Menu functions

Sound

Significance

 

 

 

 

2 beeps/10 seconds

Charging

 

 

5 beeps over 2 seconds

Starting blade disc

 

 

3 beeps/second

Fault message

 

 

One long beep

Blade disc blocked

 

 

Short click sound

A button on the keypad has been pressed

 

 

Muffled long beep

Incorrect input

 

 

 

The STOP button is pressed and the mower is

 

manually removed from the charging station while

 

charging.

 

 

Short double beep

A change to the setting has been made

 

 

 

The STOP button is pressed and the mower is

 

manually inserted in the charging station.

 

 

Language (4-3)

Using this function you can change the language selection you made when the Automower was first started.

To select the language: Move the cursor to Language and press YES. Now move the cursor to the required language and press YES.

Security

Sounds

Language

Time and date

4-3

Automower from

63

Image 63
Contents Operator’s manual Page Table of contents Table of contents Introduction Introduction and safetySymbols on Automower Xxxxxx xxxxx xxxx xxxx xxxxx Symbols in the Operator’s ManualUse Safety instructionsTransport MaintenancePresentation Numbers in the picture correspond to Automower, what’s what?Function of Automower CapacityMowing technique Working method 3012-388 3012-700 3012-400 Search method Movement patternSearch method 1 Irregular Search method 2 Follow loop Search method 3 Follow guide wireOne Automower in several gardens More than one Automower in a gardenCarry out the installation in the following steps InstallationInstallation of the charging station PreparationsIdeal position of the charging station Low voltage cable must not be extended Installation and connecting the charging station Do not tread or walk on the charging station plate Charging the battery Installation of the boundary wireBest position for the boundary wire Boundaries for the working area 30 cm10 cm Secondary areas Boundaries within the working areaPassages when searching for the charging station Passages when mowingSlopes Laying out the boundary wire Laying the boundary wire in towards the charging station Joining the boundary wire Connecting the boundary wire3012-284 3012-264 Checking the installation Installation of the guide wire Need of a guide wireLinking the Automower to the charging station 3012-669 Placement and connection of the guide wire Maximum 3012-675 Use Charging a discharged batteryUsing the timer Starting the AutomowerStopping the Automower Restart after more than 20 seconds Switching off the AutomowerRestart Restart within 20 secondsAdjusting the cutting height Control panel Shortcuts Select ProgramsNumbers Main switchNumber series Menu functionsMain menu Browse between menusAutomower Automower main menuTimer CommandsTimer override Day timerWeekend timer Week timer GardenMon Tue Wed Thu Fri Sat Sun Run all Exit angles Follow loop Proportion firstFollow loop out Direction DistanceProportion Follow loop Corridor width When Test in 3-2-4 is used, the house icon TestTest OUT Complex Garden shapeOpen NormalDrive past wire AdvancedCheck loop Time lock SettingsSecurity PIN codeStop protection Keypad Settings lockSounds OperationSound Significance LanguageTime and date Garden shape Open Garden example proposed installation and settingsCorridor width Guide wire Garden shape Normal Proportion 40 % Distance 40 m and Proportion 20 %. Area3012-530 Maintenance Automower BatteryService Winter storageCleaning After winter storageUnderframe and blade disc Wheels Do not use running water when cleaningReplacing the blades Chassis3012-260 Fault messages Trouble shootingTrouble shooting Wrong time Symptom Cause Action Uneven mowingResults Automower runs atTechnical data Environmental InformationData Automower from Husqvarna EU Declaration of Conformity only applies to Europe EU declaration of conformityEU declaration of conformity Auto IndexMain menu 43, 47 Start Automower Working area Boundaries Automower from Automower from Page 2005W48