Printing enlargements or reductions
7. Click Roll Paper in the LMedia Source list.
8. Select the width of the loaded roll in the MRoll Paper W idth list-in this case, ISO A2/A3 Roll
(420.0mm) .
9. In the APage Size list, click the size of the original as specied in the application. In this case,
click ISO A4 or Letter (8.5"x1 1") .
10. Select the CEnlarged/Reduced Printing check box.
1 1. Click ISO A4 in the GMedia Size list.
12. Click FScaling and enter “120.”
Note
•Y ou can specify enlargement that exceeds the paper size, but in this case, the portion of f the edge of
the paper will not be printed.
•If the original size after enlargement or reduction is smaller than the paper size, the original is
printed in the upper-left corner . In this case, you can center originals by selecting GPrint Centered
on the Layout sheet.
13. Conrm the print settings and print as desired.
Note
•For tips on conrming print settings, see “Conrming Print Settings (Windows)”. (→P .443)
Enhanced Printing Options 253