Printing procedure
Basic Printing W orkowPrinting procedure
Loading and Printing on Rolls
These are the basic steps for loading and printing on rolls.
Follow the steps below to switch to a new roll or a roll of a dif ferent type or width before printing.
Note
•If a sheet is loaded in the T op Paper Feed Slot , remove it before this procedure. ( → P .146)
•Before printing banners or other long documents, spread a clean cloth or paper on the oor or use the
Output Stacker to prevent the printed surface from becoming dirty from the oor after printing.
•If you will wait for the ink to dry after printing and simply eject the document, you can deactivate
automatic cutting and print a cut line instead. ( → P .129)
1. T urn the printer on. (→P .19)
2. Select roll paper as the paper source. (→P .1 15)
80 Basic Printing W orkow