Canon 1016B002 Printing from Mac OS X

Printing procedure

Printing from Mac OS X

Print from the application menu after registering the printer .

Important

•W e recommend exiting unnecessary applications before printing. Running several applications while

printing may interrupt the transfer of print data and af fect printing quality .

Before printing, you must register the printer in Printer Setup Utility (or Print Center ).

For instructions on registering the printer , see “Conguring the Printer Driver Destination (Macintosh)”.

(→P .573)

Important

•During this setup process, the printer will not be listed among available printers if it is of f or disconnected.

•By factory default, the AppleT alk protocol is disabled on the printer . Y ou must enable the AppleT alk

protocol before using the printer in an AppleT alk network. For instructions on activating AppleT alk

protocol, see “Conguring the Destination for AppleT alk Network (Macintosh)”. (→P .574)

Note

•When registering the printer , choose USB if the printer is connected via USB, Canon FireW ire(iPF) if

connected via IEEE 1394, or AppleT alk ,Canon IP(iPF) , or Bonjour if connected via a network.

•For Canon IP(iPF) connections, enter the printer ’ s IP address.

Basic Printing W orkow 89