Canon 1016B002 Printing from Mac OS 9

Printing procedure

Printing from Mac OS 9

After selecting the printer in Chooser from the Apple menu, print by using menus in the application software.

Important

•W e recommend exiting unnecessary applications before printing. Running several applications while

printing may interrupt the transfer of print data and af fect printing quality .

Before printing, you must conrm that the printer is selected in Chooser .

For instructions on selecting the printer , see “Conguring the Printer Driver Destination (Macintosh)”. (→P .573)

Important

•During this setup process, the printer will not be listed in Chooser if it is of f or disconnected.

•By factory default, the AppleT alk protocol is disabled on the printer . Y ou must enable the AppleT alk

protocol before using the printer in AppleT alk network. For instructions on activating AppleT alk protocol,

see “Conguring the Destination for AppleT alk Network (Macintosh)”. (→P .574)

Note

•In Chooser , choose GARO Printer Driver .

•In Destination , choose USB if the printer is connected via USB, FireW ire if connected via IEEE 1394,

or AppleT alk ,IP Print , or IP Print (Auto) if connected via network.

•If the printer is connected via AppleT alk , click Active under AppleT alk in the lower-right corner of

the Chooser window .

•If the printer is connected via IP Print , click Registering IP Address under the Destination list to

Basic Printing W orkow 91