Printing banners or at other non-standard sizes
7. Click the Page Setup tab to display the Page Setup sheet.
8. Click OSize Options to display the Media Size Options dialog box.
9. Complete the following settings in the Media Size Options dialog box.
1. Enter a desired paper name in Custom Media Size Name . “430 mm Square” is used in this example.
2. Select mm or inch in Units .
3. Enter “430” [16.9 in] in both W idth and Height .
Note
•If you select the Fix the Ratio of the W idth to Height check box, after you enter a value in either
W idth or Height , the other value will be automatically applied based on the original aspect ratio.
10. Click Add to register “430 mm Square.”
1 1. Click OK to close the Media Size Options dialog box.
12. Click Manual in the LMedia Source list.
13. In the APage Size list, click the size you added, "430 mm Square."
14. Conrm the print settings and print as desired.
Note
•For instructions on conrming print settings, see “Conrming Print Settings (Windows)”. (→P .443)
Enhanced Printing Options 335