Canon 1016B002 Conguring the IP Address Using imagePROGRAF Device Setup Utility

Windows
Conguring the IP Address Using imagePROGRAF
Device Setup Utility
From a computer running Windows, you can use imagePROGRAF Device Setup Utility provided with the
printer to congure the printer ’ s IP address. This topic describes how to congure the IP address using
imagePROGRAF Device Setup Utility .
Important
•T o congure network settings, you must be logged in with administrative rights such as “Administrator”
account. W e recommend that your network administrator congure the network settings.
•For instructions on installing imagePROGRAF Device Setup Utility , see “Installing imagePROGRAF
Device Setup Utility”. (→P .470)
1. Start imagePROGRAF Device Setup Utility from the start menu.
2. In the list of printers, select the printer to congure.
3. Choose Protocol Settings from the Printer menu.
4. In the Setting IP Address list, choose Manual .
5. Enter the IP address assigned to the printer and click the Set button.
6. Click OK after the Conrmation message dialog box is displayed.
7. Exit imagePROGRAF Device Setup Utility .
Note
•T o congure the IP address automatically , choose Auto in the Setting IP Address list and select
DHCP ,BOOTP , or RARP .
•Y ou can also specify the subnet mask and default gateway .
Software 471