Chapter 2 Cisco SDM Express Edit Mode
Routing
The server is not a web or email server, but requires port translation to provide service. This choise activates the Translated Port field and the Protocol
If you do not choose a server type, all traffic intended for the public IP address you choose for the server will be routed to it, and no port translation will be done.
Original Port
Enter the port number used by the server to accept service requests from the internal network.
Translated Port
Enter the port number used by the server to accept service requests from the
Internet.
Protocol
Choose TCP or UDP for the protocol used by the server with the original and translated ports.
Routing
The Routing window allows you to edit an existing default route when configuration changes indicate that editing the default route is advisable. For example, if you have changed a static IP address of a WAN interface, you may also need to change the IP address of the default gateway.
Enable Check Box
Check if you want to enable a default route. If a default route has already been defined, this box will be checked. Unchecking it disables the default route.
Forwarding (Next Hop) Field
You can specify an interface on the router as the next hop, or you can specify an IP address. If you click Interface, select the interface from the drop down list. If you click IP address, enter the IP address.
|
| Cisco SDM Express |
|
|
|
|
| ||
|
|
| ||
|
|
|
