3Com Switch 4200G Family

19

Command Reference

 

file prompt

Use the file prompt command to modify the prompt mode of file operations on the Switch.

System view

flow-control

Use the flow-controlcommand to enable port flow control, to avoid packet loss in the event of network congestion.

Ethernet Port view

Web command: Port -> Administration

format

Use the format command to format a storage device.

User view

free user-interface

Use the free user-interfacecommand to reset a specified user interface to its default settings. The user interface will be disconnected after the reset.

User view

free web-users

Use the free web-userscommand to disconnect a specified Web user or all Web users by force.

User view

ftp

Use the ftp command to establish a control connection with an FTP server and enter FTP client view.

User view

ftp cluster

Use the ftp cluster command to establish a control connection with a cluster FTP server. This command also leads you to FTP client view.

User view

ftp server

Use the ftp server command to configure an FTP server on the management device for the member devices in the cluster.

Use the undo ftp server command to remove the FTP server configured for the member devices in the cluster.

System view

ftp server enable

Use the ftp server enable command to enable FTP server and allow FTP users to log in.

System view

ftp timeout

Use the ftp timeout command to configure connection timeout interval.

System view

garp timer

Use the garp timer command to set the GARP Hold, Join or Leaver timer value on the current port.

Ethernet Port view

garp timer leaveall

Use the garp timer leaveall command to set the GARP LeaveAll timer to a specified value.

System view

get

Use the get command to download a remote file and save the file to the local device.

SFTP Client view

get

Use the get command to download a remote file and save it as a local file.

FTP Client view

gratuitous-arp learning enable

Use the gratuitous-arp-learning enable command to enable the gratuitous ARP packet learning function.

System view

gvrp

Use the gvrp command to enable GVRP globally (in system view) or on a port (in Ethernet port view).

System view

Ethernet Port view

Page 19
Image 19
3Com 10014917 manual Use the format command to format a storage device