3Com 10014917 manual System view Web command Device ACL Security IP, MST Region view, Cluster view

3Com Switch 4200G Family	3
Command Reference

acl

Use the acl command to define an ACL identified by a number, and enter the corresponding ACL View.

System view

Web command: Device -> ACL

Security -> IP

active region-configuration

Use the active region-configurationcommand to activate the settings of an MST (multiple spanning tree) region.

MST Region view

add-member

Use the add-membercommand to add a candidate device to a cluster.

Cluster view

address-check

Use the address-checkcommand to enable or disable DHCP relay security on a VLAN interface, so as to start or stop the validity check on user addresses under the VLAN interface.

VLAN Interface view

administrator-address

Use the administrator-addresscommand to store the MAC address of the management device on a member device.

Cluster view

Web command: Port -> Statistics

am user-bind

Use the am user-bindcommand to bind the MAC and IP addresses of a legal user to a specified port.

System view

Ethernet Port view

apply qos-profile

Use the apply qos-profilecommand to manually apply the QoS profile to the current port.

Ethernet Port view

Web command: Device -> ACL/QoS -> Profile

apply qos-profile interface

Use the apply qos-profile interface command to manually apply a QoS profile to one or more consecutive ports.

System view

arp check enable

Use the arp check enable command to enable the ARP entry checking function, that is, to disable a switch from creating multicast MAC address ARP entries for MAC addresses learned.

System view

arp static

Use the arp static command to configure the static ARP mapping entries in the ARP mapping table.

System view

arp timer aging

Use the arp timer aging command to configure the aging time for dynamic ARP mapping entries.

System view

ascii

Use the ascii command to configure data transmission mode as ASCII mode.

FTP Client view

attribute

Use the attribute command to configure attributes of a user whose service type is lan-access.

Local User view

Web command: Administration -> System

authentication

Use the authentication command to configure an authentication scheme for the current ISP domain.

ISP Domain view

authentication-mode

Use the command authentication-modeto specify the authentication mode.

User Interface view

authorization

Use the authorization none command to allow users in the current ISP domain to use network services without being authorized.

ISP Domain view