3Com 10014917 manual Ethernet Port view System view, System view Web command Device Spanning Tree

38	3Com Switch 4200G Family
	Command Reference

stp interface cost

Use the stp interface cost command to set the path cost of specified ports in a specified spanning tree instance.

System view

stp interface edged-port

Use the stp interface edged-portcommand to configure the specified Ethernet ports to be either edge ports or non-edge ports.

System view

stp interface loop protection

Use the stp interface loop-protectioncommand to enable the loop prevention function.

System view

stp interface mcheck

Use the stp interface mcheck command to perform the mCheck operation for specified ports.

System view

stp interface no-agreement-check

Use the stp interface no-agreement-checkcommand to enable the rapid transition feature on a specified port.

System view

stp interface point-to-point

Use the stp interface point-to-pointcommand to specify whether the specified Ethernet ports are point-to-point links.

System view

stp interface port priority

Use the stp interface port priority command to set the port priority of specified ports in a spanning tree instance.

System view

stp interface root-protection

Use the stp interface root-protectioncommand to enable the root protection function for specified ports.

System view

stp interface transmit-limit

Use the stp interface transmit-limitcommand to set the maximum number of BPDUs that each specified port can send within a Hello time interval.

System view

stp loop-protection

Use the stp loop-protectioncommand to enable the loop prevention function for the current port.

Ethernet Port view

stp max-hops

Use the stp max-hopscommand to set the maximum hop count of the MST region to which the switch belongs.

System view

stp mcheck

Use the stp mcheck command to perform the mCheck operation for the current port.

Ethernet Port view

System view

stp mode

Use the stp mode command to set the MSTP operation mode of the switch.

System view

Web command: Device -> Spanning Tree

stp no-agreement-check

Use the stp no-agreement-checkcommand to enable the rapid transition feature on the current port.

Ethernet Port view

stp pathcost-standard

Use the stp pathcost-standardcommand to set the standard used for calculating the default path costs of ports.

System view

stp point-to-point

Use the stp point-to-pointcommand to specify whether the port must connect to point-to-point link.

Ethernet Port view