36

3Com Switch 4200G Family

 

Command Reference

snmp-agent trap queue-size

Use the snmp-agent trap queue-sizecommand to configure the information queue length of a Trap packet sent to the destination host.

System view

snmp-agent trap source

Use the snmp-agent trap source command to configure the source address for sending Trap messages.

System view

snmp-agent usm-user

Use the snmp-agentusm-usercommand to add a new community name or, if you use the V3 parameter, a new user to an SNMP group.

System view

Web command: Administration -> SNMP -> Users

snmp-agent usm-user

Use the snmp-agentusm-usercommand to add a new user to an SNMP group. You can also optionally use this command to apply an ACL to filter network management users.

System view

snmp-agent usm-user

Use the snmp-agentusm-usercommand to add a new user to an SNMP group.

System view

snmp-agent usm-user

Use the snmp-agentusm-usercommand to add a new community name or, if you use the V3 parameter, a new user to an SNMP group.

System view

snmp-host

Use the snmp-hostcommand to configure an SNMP host for the member devices inside a cluster on the management device.

Cluster view

speed

Use the speed command to set the transmission speed of the user interface.

User Interface view

speed

Use the speed command to configure the port rate.

Ethernet Port view

Web command: Port -> Administration

ssh client assign rsa-key

Use the ssh client assign rsa-keycommand to specify on the client the public key for the server to be connected to guarantee the client can be connected to a reliable server.

System view

ssh client first-time enable

Use the ssh client first-time enable command to configure the client to run the initial authentication.

System view

ssh server authentication-retries

Use the ssh server authentication-retriescommand to set authentication retry number for SSH connections.

System view

ssh server timeout

Use the ssh server timeout command to set authentication timeout time for SSH connections.

System view

ssh user assign rsa-key

Use the ssh user assign rsa-keycommand to allocate public keys to SSH users.

System view

ssh user authentication-type

Use the ssh user authentication-typecommand to define on the server the available authentication type for an SSH user.

System view

ssh user service-type

Use the ssh user service-typecommand to specify service type for a user.

System view

Page 36
Image 36
3Com 10014917 manual System view Web command Administration Snmp Users, Cluster view