3Com 10014917 manual Display cluster black-list

3Com Switch 4200G Family	9
Command Reference

display cluster black-list

Use the display cluster black-listcommand to display the current blacklist of the cluster.

Any view

display cluster candidates

Use the display cluster candidates command to display candidate devices of a cluster.

Any view

display cluster current-topology

Use the display cluster current topology command to display the current topology view or the topology path between two points.

Any view

display cluster members

Use the display cluster members command to display the information about cluster members.

Any view

display connection

Use the display connection command to view the information for a specified connection type.

Any view

display cpu

Use the display cpu command to display CPU usage of a specified switch.

Any view

display current-configuration

Use the display current-configurationcommand to display the current configuration of a switch.

Any view

display debugging

Use the display debugging command to display the enabled debugging on a specified device.

Any view

display debugging habp

Use the display debugging habp command to display the state of HABP debugging.

Any view

display device

Use the display device command to display the information, such as the module type and operating status, about each board (main board and sub-board) of a specified switch.

Any view

display dhcp client

Use the display dhcp client command to display the DHCP client-related information.

Any view

display dhcp-security

Use the display dhcp-securitycommand to display one or all user address entries, or a specified type of user address entries in the valid user address table of a DHCP server group.

Any view

display dhcp-server

Use the display dhcp-servercommand to display information about a specified DHCP server group.

Any view

display dhcp-server interface vlan-interface

Use the display dhcp-server interface vlan-interfacecommand to display information about the

DHCP server group to which a VLAN interface is mapped.

Any view

display dhcp-snooping

Use the display dhcp-snoopingcommand to display the user IP-MAC address mapping entries recorded by the DHCP snooping function.

Any view

display dhcp-snooping

Use the display dhcp-snoopingcommand to display the correspondence between user IP addresses and

MAC addresses recorded by the DHCP snooping function.

Any view

display dhcp-snooping trust

Use the display dhcp-snooping trust command to display the (enabled/disabled) state of the DHCP snooping function and the trusted ports.

Any view