22 | 3Com Switch 4200G Family |
| Command Reference |
interface
Use the command interface command to enter Ethernet port view. To configure parameters for a port, you must enter the port view first.
System view
interface
Use the interface
System view
Web command: Device
Administration
ip address
Use the ip address command to assign an IP address (and mask) to a management VLAN interface.
VLAN Interface view
Web command: Administration
ip address
Use the ip address
BOOTP.
VLAN Interface view
ip address
Use the ip address
DHCP.
VLAN Interface view
ip host
Use the ip host command to configure a host name and the corresponding IP address for a switch.
System view
ip http acl
Use the ip http acl command to apply an ACL to filter Web users.
System view
User Interface view
Use the
Cluster view
ip
Use the ip route-static command to configure a static route.
Use the ip
System view
Web command: Device
ip
Use the ip
System view
key
Use the key command to specify a shared key for the RADIUS authentication/authorization packets or accounting packets.
RADIUS Scheme view
Web command: Security -> RADIUS Client
lacp enable
Use the lacp enable command to enable the LACP protocol on the current port.
Ethernet Port view
Web command: Port -> LACP
lacp
Use the lacp port priority command to configure port priority value.
Ethernet Port view
lacp
Use the lacp
