46CHAPTER 3: SETTING UP FOR MANAGEMENT
Figure 18 Example top-level command line interface menu
4At the Select menu option prompt enter the protocol ip interface summary command. At the Select IP interfaces prompt enter all. A summary of the automatically allocated IP information is displayed. Make a note of the Network IP Address.
The initial set up of your Switch is now complete and the Switch is ready for you to set up your chosen management method. See “Methods of Managing a Switch” on page 46.
If you do not intend to use the command line interface via the console port to manage the Switch, you can disconnect the serial cable and close the terminal emulator software.
Methods ofOnce you have completed the initial set up of your Switch, you can Managing a Switch decide how you wish to manage the Switch. You can use one of the
following methods:
■Command line interface management
■Web interface management
■SNMP management
Command Line Each Switch has a command line interface (CLI) that allows you to Interface manage the Switch from a workstation, either locally via a console port
Management connection (see Figure 19), or remotely over the network (see Figure 20).
